Other, treated with paint, stains, creosote or other preservatives
Hoopwood; split poles; piles, pickets and stakes of wood, pointed but not sawn lengthwise; wooden sticks, roughly trimmed but not turned, bent or otherwise worked, suitable for the manufacture of walking-sticks, umbrellas, tool handles or the like; chipwood and the like. > Of Hem-fir (Western hemlock (Tsuga heterophylla) and fir (Abies spp.)) > Other > End-jointed, treated or combination species: > Other, treated with paint, stains, creosote or other preservatives
Duty Rate (from China)
Products classified under Tariff item 4407.19.00.1
End-Jointed Pine Beam Blanks
End-jointed Lodgepole pine sawn boards, 50mm thick, finger-jointed for stability. These boards are sawn lengthwise from coniferous wood, exceeding 6mm in thickness, and are intended for further fabrication. They fall under tariff item 4407.19.00 as 'other' coniferous sawn wood, not classified as S-P-F or Hem-fir.
4407.19.00Finger-Jointed Cedar Siding Boards
Finger-jointed cedar siding boards, sawn from coniferous wood exceeding 6mm thick, for weather-resistant exterior cladding. This wood is not S-P-F or Hem-fir, so it falls under 'other' in tariff item 4407.19.00. The finger-jointing provides seamless lengths.
4407.19.00Finger-Jointed Douglas Fir Planks 1x12
Finger-jointed Douglas fir planks, 1x12 inches, sawn from coniferous wood over 6mm thick, for decking and siding. This wood is not S-P-F or Hem-fir, so it is classified as 'other' under tariff item 4407.19.00. The finger-jointing provides extended lengths.
4407.19.00Finger-Jointed Fir Framing Lumber 2x8
Finger-jointed fir framing lumber, 2x8, sawn from coniferous wood exceeding 6mm, for roof trusses. This wood is not S-P-F or Hem-fir, so it falls under 'other' in tariff item 4407.19.00. The finger-jointing provides load-bearing strength.
4407.19.00Finger-Jointed Hem-Fir Beam 4x8
Finger-jointed Hem-fir beam, 4x8 inches, sawn from non-SPF Hem-fir, thickness over 6mm, for residential and commercial construction. This wood is not S-P-F, so it falls under 'other' in tariff item 4407.19.00. The finger-jointing provides extended length and strength.
4407.19.00Finger-Jointed Larch Lumber 2x10
Finger-jointed larch lumber, 2x10 inches, sawn from coniferous species exceeding 6mm, for joists and rafters. This wood is not S-P-F or Hem-fir, so it is classified as 'other' under tariff item 4407.19.00. The finger-jointing provides structural integrity.
4407.19.00Kiln-Dried Engelmann Spruce Lumber
Kiln-dried Engelmann spruce lumber, sawn into boards of 25mm thickness, sanded for a smooth finish. This coniferous wood is not classified as S-P-F or Hem-fir, making it 'other' under tariff item 4407.19.00. It is suitable for musical instruments and other fine woodworking.
4407.19.00Peeled Redwood Lumber
Peeled redwood lumber from dawn redwood (Metasequoia), sawn and peeled lengthwise, 45mm thick, for landscaping ties. This coniferous species is not S-P-F or Hem-fir, so it falls under 'other' in tariff item 4407.19.00. The peeling process is part of the sawn wood preparation.
4407.19.00Planed Eastern White Pine Boards
Planed eastern white pine boards, sawn from Pinus strobus, 38mm x 140mm, end-jointed for cabinetry blanks. This coniferous wood is not S-P-F or Hem-fir, so it is classified as 'other' under tariff item 4407.19.00. The planing and end-jointing are finishing operations.
4407.19.00Planed Western Red Cedar Decking Boards
Planed Western red cedar decking boards, sliced and planed to 25mm x 150mm, sanded for outdoor use. This coniferous wood is not S-P-F or Hem-fir, so it falls under 'other' in tariff item 4407.19.00. The natural rot resistance makes it ideal for decking.
4407.19.00Sanded Larch Sawn Timber
Sanded European larch sawn timber, 40mm x 200mm, for structural beams. This coniferous wood is not S-P-F or Hem-fir, so it is classified as 'other' under tariff item 4407.19.00. The sanding provides a smooth finish for construction use.
4407.19.00Sanded Lodgepole Pine Studs
Sanded Lodgepole pine studs, sawn to 38x89mm, kiln-dried for residential framing. This coniferous wood is not S-P-F, so it falls under 'other' in tariff item 4407.19.00. The sanding and kiln-drying are finishing operations.
4407.19.00Sawn Douglas Fir Lumber 2x4
Kiln-dried Douglas fir lumber sawn to 2x4 dimensions (38mm x 89mm), planed and sanded for a smooth finish. This coniferous wood is not S-P-F or Hem-fir, so it is classified as 'other' under tariff item 4407.19.00. The planing and sanding are finishing operations.
4407.19.00Sawn Hemlock Beam Stock
Sawn mountain hemlock beams, 100mm x 200mm, planed for heavy timber construction. This coniferous wood is not Hem-fir, so it falls under 'other' in tariff item 4407.19.00. The planing provides a smooth surface for structural use.
4407.19.00Sliced Alaskan Yellow Cedar Planks
Sliced Alaskan yellow cedar planks, 30mm thick, planed for boat building. This coniferous wood is not S-P-F or Hem-fir, so it is classified as 'other' under tariff item 4407.19.00. The slicing and planing are finishing operations.