Sanded Lodgepole Pine Studs
Lodgepole pine (Pinus contorta) sawn studs, 38x89mm, sanded and kiln-dried for residential framing. This coniferous wood is not classified as S-P-F, so it falls under tariff item 4407.19.00 as 'other' coniferous sawn wood.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +25.0% | 25% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the pine is of the species Pinus sylvestris
Scots pine has a specific subheading under coniferous wood.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the pine is declared as Pinus contorta to avoid S-P-F classification
• Provide kiln-drying certificates
• Verify stud dimensions meet the thickness requirement
Related Products under Tariff item 4407.19.00
Creosote Douglas Fir Railway Ties
Creosote-treated Douglas fir railway ties, sawn to 8x10x8 feet and exceeding 6 mm in thickness, are used for railroad track support. The creosote pressure treatment preserves the wood for outdoor and ground-contact use. As coniferous wood sawn lengthwise and treated with preservatives, these ties fall under this tariff item.
Creosote Treated Fir Fence Posts
Creosote-treated fir fence posts, sawn to 4x4x8 feet and exceeding 6 mm in thickness, are used for ground-contact fencing applications. The creosote pressure treatment provides durability against rot and insects. As coniferous wood sawn lengthwise and treated with preservatives, these posts fall under this tariff item.
Douglas-Fir 2x12 Rough Joist Lumber
Douglas-Fir 2x12 Rough Joist Lumber consists of nominal 2x12 rough-sawn, untreated coniferous joists measuring 5.1 cm x 30.5 cm, with a minimum dimension of exactly 5.1 cm. Sawn lengthwise to a thickness exceeding 6 mm, these joists are used for floor construction and are not planed, sanded, or end-jointed, falling under tariff item 4407.19.00.
Douglas-Fir 2x4 Rough Boards
Untreated rough-sawn Douglas-fir boards in nominal 2x4 dimensions, where the actual thickness of 3.8 cm exceeds 6 mm, are used for stud framing in residential construction. The boards are sawn lengthwise and not planed, sanded or end-jointed. As coniferous wood not elsewhere specified, these boards fall under this tariff item.
Douglas-Fir 4x8 Rough Framing Lumber
Douglas-Fir 4x8 Rough Framing Lumber is rough-sawn, untreated coniferous lumber measuring 10.2 cm x 20.3 cm, with a minimum dimension of 10.2 cm. Sliced lengthwise from coniferous logs to a thickness exceeding 6 mm, this lumber is used for construction framing and is not planed, sanded, or end-jointed, qualifying under tariff item 4407.19.00.
Douglas-Fir 5x6 Rough Sawn Studs
Douglas-Fir 5x6 Rough Sawn Studs are rough-sawn, untreated coniferous studs measuring 12.7 cm x 15.2 cm, with a minimum dimension of 12.7 cm. Sawn lengthwise to a thickness exceeding 6 mm, these studs are used for wall framing and are not planed, sanded, or end-jointed, falling under tariff item 4407.19.00.