Finger-Jointed Douglas Fir Planks 1x12
Finger-jointed Douglas fir planks, 1x12 inches, sawn from coniferous wood over 6mm thick, for decking and siding. This wood is not S-P-F or Hem-fir, so it is classified as 'other' under tariff item 4407.19.00. The finger-jointing provides extended lengths.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +25.0% | 25% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the wood is of pine (Pinus spp.) and meets S-P-F criteria
S-P-F (spruce-pine-fir) is a specific subheading for mixed coniferous species.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the species is Douglas fir (Pseudotsuga menziesii) and not a mixed conifer
• Document the finger-jointing process for CBSA
• Ensure the thickness exceeds 6mm as per tariff requirements
Related Products under Tariff item 4407.19.00
End-Jointed Pine Beam Blanks
End-jointed Lodgepole pine sawn boards, 50mm thick, finger-jointed for stability. These boards are sawn lengthwise from coniferous wood, exceeding 6mm in thickness, and are intended for further fabrication. They fall under tariff item 4407.19.00 as 'other' coniferous sawn wood, not classified as S-P-F or Hem-fir.
Finger-Jointed Cedar Siding Boards
Finger-jointed cedar siding boards, sawn from coniferous wood exceeding 6mm thick, for weather-resistant exterior cladding. This wood is not S-P-F or Hem-fir, so it falls under 'other' in tariff item 4407.19.00. The finger-jointing provides seamless lengths.
Finger-Jointed Fir Framing Lumber 2x8
Finger-jointed fir framing lumber, 2x8, sawn from coniferous wood exceeding 6mm, for roof trusses. This wood is not S-P-F or Hem-fir, so it falls under 'other' in tariff item 4407.19.00. The finger-jointing provides load-bearing strength.
Finger-Jointed Hem-Fir Beam 4x8
Finger-jointed Hem-fir beam, 4x8 inches, sawn from non-SPF Hem-fir, thickness over 6mm, for residential and commercial construction. This wood is not S-P-F, so it falls under 'other' in tariff item 4407.19.00. The finger-jointing provides extended length and strength.
Finger-Jointed Larch Lumber 2x10
Finger-jointed larch lumber, 2x10 inches, sawn from coniferous species exceeding 6mm, for joists and rafters. This wood is not S-P-F or Hem-fir, so it is classified as 'other' under tariff item 4407.19.00. The finger-jointing provides structural integrity.
Kiln-Dried Engelmann Spruce Lumber
Kiln-dried Engelmann spruce lumber, sawn into boards of 25mm thickness, sanded for a smooth finish. This coniferous wood is not classified as S-P-F or Hem-fir, making it 'other' under tariff item 4407.19.00. It is suitable for musical instruments and other fine woodworking.