Hemlock-Fir Kiln Dried 1x6 Boards
Planed and sanded Hem-fir boards measuring 3/4 by 5-1/4 inches and 12 feet long, used for paneling and shelving. The boards exceed 6 mm thickness and are sourced from mixed hemlock-fir stands, qualifying under tariff item 4407.14.00 with KD19 moisture certification.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +25.0% | 25% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the boards are pine rather than Hem-fir
Pine boards are classified under a different subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Include the KD19 moisture certification in your documentation to support the product description
• Verify that sanding does not remove too much material, affecting thickness classification
• Check if the boards require edge or end treatments for import
Related Products under Tariff item 4407.14.00
FAS Grade Hem-Fir Lumber 4/4x8
FAS grade Hem-fir lumber, sawn and planed to 4/4 thickness by 8 inches wide, intended for furniture and cabinetry. The wood exceeds 6 mm in thickness and is sourced from mixed stands of Western hemlock and fir, meeting the definition of Hem-fir under subheading note 4.
Hem-Fir Beam 6x10 Rough Sawn
Rough sawn Hem-fir timber beams measuring 5-1/2 by 9-1/2 inches and 16 feet long, used for exposed ceiling beams. The thickness exceeds 6 mm and the wood is sourced from mixed hemlock-fir stands, qualifying under tariff item 4407.14.00.
Hem-Fir S4S Lumber 2x4
Kiln-dried Hem-fir lumber surfaced on four sides (S4S), measuring 1.5 by 3.5 inches by 8 feet, exceeding 6 mm thickness. This is sawn coniferous wood from mixed hemlock-fir stands, fitting tariff item 4407.14.00.
Hem-Fir Scaffold Plank 2x10
Select structural Hem-fir scaffold planks measuring 1-1/2 by 9-1/4 inches and 12 feet long, graded for scaffolding use. The planks are sawn coniferous wood exceeding 6 mm thickness, sourced from mixed hemlock-fir stands, and fall under tariff item 4407.14.00.
KD Hem-Fir Decking 5/4x6
Kiln-dried Hem-fir decking boards measuring 1 by 5-1/4 inches and 16 feet long, square-edged for outdoor use. These are planed coniferous sawn wood exceeding 6 mm thickness, sourced from hemlock-fir stands, and fall under tariff item 4407.14.00.
No.2 Grade Hem-Fir Studs 2x4x92-5/8
Grade No.2 Hem-fir pre-cut studs measuring 1.5 by 3.5 inches and 92-5/8 inches long, used for wall framing. These are sawn coniferous wood exceeding 6 mm thickness, sourced from mixed hemlock-fir stands, and meet building code specifications under tariff item 4407.14.00.