Hem-Fir S4S Lumber 2x4
Kiln-dried Hem-fir lumber surfaced on four sides (S4S), measuring 1.5 inches by 3.5 inches by 8 feet, with thickness exceeding 6 mm. This product is sawn from mixed Western hemlock and fir stands and planed to smooth surfaces. It is not further worked, placing it under tariff item 4407.14.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +25.0% | 25% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the lumber is from pine rather than Hem-fir
Pine is classified under a separate subheading for coniferous sawn wood.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the S4S process does not include additional treatments that could change classification
• Provide the kiln-drying certificate to support the product description
• Ensure the species mix is documented as Hem-fir for accurate tariff application
Related Products under Tariff item 4407.14.00
FAS Grade Hem-Fir Lumber 4/4x8
FAS grade Hem-fir lumber, 4/4 thickness by 8 inches wide, sawn and planed for use in furniture and cabinetry. This product is derived from mixed stands of Western hemlock and fir, meeting the definition of Hem-fir under subheading note 4. It exceeds 6 mm in thickness and is not further worked beyond planing, classifying it under tariff item 4407.14.00.
Hem-Fir Beam 6x10 Rough Sawn
Rough sawn Hem-fir timber beams measuring 5-1/2 inches by 9-1/2 inches by 16 feet, intended for exposed ceiling applications. The product is sawn lengthwise from mixed stands of Western hemlock and fir, exceeding 6 mm in thickness. It is not further processed beyond rough sawing, qualifying for tariff item 4407.14.00.
Hem-Fir Scaffold Plank 2x10
Select structural Hem-fir scaffold planks, 1-1/2 inches by 9-1/4 inches by 12 feet, graded for scaffolding applications. These planks are sawn lengthwise from mixed Western hemlock and fir stands, exceeding 6 mm in thickness. They are not further worked beyond sawing and grading, fitting tariff item 4407.14.00.
Hemlock-Fir Kiln Dried 1x6 Boards
Planed and sanded Hem-fir boards, 3/4 inch by 5-1/4 inches by 12 feet, kiln-dried to KD19 moisture content for paneling and shelving. The boards are sawn from mixed Western hemlock and fir stands, exceeding 6 mm in thickness. They are not further worked beyond planing and sanding, classifying under tariff item 4407.14.00.
KD Hem-Fir Decking 5/4x6
Kiln-dried Hem-fir decking boards, 1 inch by 5-1/4 inches by 16 feet, square-edged for outdoor use. These boards are sawn from mixed Western hemlock and fir stands, exceeding 6 mm in thickness, and planed to smooth surfaces. They are not further worked, placing them under tariff item 4407.14.00.
No.2 Grade Hem-Fir Studs 2x4x92-5/8
No.2 grade Hem-fir pre-cut studs, 1.5 inches by 3.5 inches by 92-5/8 inches, for wall framing applications. These studs are sawn lengthwise from mixed Western hemlock and fir stands, exceeding 6 mm in thickness. They are not further manufactured beyond sawing and grading, fitting tariff item 4407.14.00.