Hem-Fir Scaffold Plank 2x10
Select structural Hem-fir scaffold planks, 1-1/2 inches by 9-1/4 inches by 12 feet, graded for scaffolding applications. These planks are sawn lengthwise from mixed Western hemlock and fir stands, exceeding 6 mm in thickness. They are not further worked beyond sawing and grading, fitting tariff item 4407.14.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +25.0% | 25% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the planks are from pine species
Pine scaffold planks would be classified under a different coniferous subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the planks meet Canadian grading standards for scaffolding to avoid delays
• Document the Hem-fir species mix and thickness for customs classification
• Consider any additional safety certifications required for construction use
Related Products under Tariff item 4407.14.00
FAS Grade Hem-Fir Lumber 4/4x8
FAS grade Hem-fir lumber, 4/4 thickness by 8 inches wide, sawn and planed for use in furniture and cabinetry. This product is derived from mixed stands of Western hemlock and fir, meeting the definition of Hem-fir under subheading note 4. It exceeds 6 mm in thickness and is not further worked beyond planing, classifying it under tariff item 4407.14.00.
Hem-Fir Beam 6x10 Rough Sawn
Rough sawn Hem-fir timber beams measuring 5-1/2 inches by 9-1/2 inches by 16 feet, intended for exposed ceiling applications. The product is sawn lengthwise from mixed stands of Western hemlock and fir, exceeding 6 mm in thickness. It is not further processed beyond rough sawing, qualifying for tariff item 4407.14.00.
Hem-Fir S4S Lumber 2x4
Kiln-dried Hem-fir lumber surfaced on four sides (S4S), measuring 1.5 inches by 3.5 inches by 8 feet, with thickness exceeding 6 mm. This product is sawn from mixed Western hemlock and fir stands and planed to smooth surfaces. It is not further worked, placing it under tariff item 4407.14.00.
Hemlock-Fir Kiln Dried 1x6 Boards
Planed and sanded Hem-fir boards, 3/4 inch by 5-1/4 inches by 12 feet, kiln-dried to KD19 moisture content for paneling and shelving. The boards are sawn from mixed Western hemlock and fir stands, exceeding 6 mm in thickness. They are not further worked beyond planing and sanding, classifying under tariff item 4407.14.00.
KD Hem-Fir Decking 5/4x6
Kiln-dried Hem-fir decking boards, 1 inch by 5-1/4 inches by 16 feet, square-edged for outdoor use. These boards are sawn from mixed Western hemlock and fir stands, exceeding 6 mm in thickness, and planed to smooth surfaces. They are not further worked, placing them under tariff item 4407.14.00.
No.2 Grade Hem-Fir Studs 2x4x92-5/8
No.2 grade Hem-fir pre-cut studs, 1.5 inches by 3.5 inches by 92-5/8 inches, for wall framing applications. These studs are sawn lengthwise from mixed Western hemlock and fir stands, exceeding 6 mm in thickness. They are not further manufactured beyond sawing and grading, fitting tariff item 4407.14.00.