Of S-P-F (spruce (Picea spp.), pine (Pinus spp.) and fir (Abies spp.))
Hoopwood; split poles; piles, pickets and stakes of wood, pointed but not sawn lengthwise; wooden sticks, roughly trimmed but not turned, bent or otherwise worked, suitable for the manufacture of walking-sticks, umbrellas, tool handles or the like; chipwood and the like. > Of S-P-F (spruce (Picea spp.), pine (Pinus spp.) and fir (Abies spp.)) > Of S-P-F (spruce (Picea spp.), pine (Pinus spp.) and fir (Abies spp.)) > Of S-P-F (spruce (Picea spp.), pine (Pinus spp.) and fir (Abies spp.))
Duty Rate (from China)
Products classified under Tariff item 4407.13.00.00
S-P-F Beam 4x10 Timber
S-P-F beam timber, sawn from mixed spruce, pine and fir stands, with a 4x10 cross-section, end-jointed and sanded for structural use. It is over 6 mm thick and has not been further worked beyond sawing, planing or sanding, so it remains classified as sawn wood under this tariff item.
4407.13.00S-P-F Construction Lumber 2x4
Kiln-dried S-P-F construction lumber in standard 2x4 dimensions, sawn lengthwise and planed, with thickness over 6 mm. It comes from mixed spruce, pine and fir stands with unknown species proportions, meeting the S-P-F definition for this tariff item.
4407.13.00S-P-F Decking Boards 5/4x6
Planed S-P-F decking boards in 5/4x6 size, sawn lengthwise and kiln-dried for outdoor use. The wood is from mixed spruce, pine and fir stands with varying species proportions, and the thickness exceeds 6 mm, so it fits this tariff item for S-P-F sawn wood.
4407.13.00S-P-F Furring Strips 1x3
Kiln-dried S-P-F furring strips with a 1x3 cross-section, sawn and planed for wall and ceiling leveling. The thickness is over 6 mm, and the wood comes from mixed S-P-F stands, making it classifiable under this tariff item for S-P-F sawn wood.
4407.13.00S-P-F Joist Hangers Base Stock
S-P-F lumber strips sawn for use as base stock in joist hanger fabrication, planed to a thickness over 6 mm. The wood is from mixed spruce, pine and fir stands and is in a basic sawn form, so it falls under this tariff item before any metal fitting assembly.
4407.13.00S-P-F Kiln-Dried 2x6 Boards
Planed and sanded S-P-F boards in 2x6 dimensions, suitable for joists and rafters, sourced from mixed spruce, pine and fir forests. The boards are sawn lengthwise, exceed 6 mm in thickness, and are end-jointed, fitting this tariff item for S-P-F sawn wood.
4407.13.00S-P-F Roof Rafters 2x8
Pre-cut kiln-dried S-P-F roof rafters in 2x8 dimensions, sawn lengthwise with end joints and sanded surfaces. The wood is from mixed S-P-F stands, exceeding 6 mm in thickness, and is classifiable under this tariff item for S-P-F coniferous sawn wood.
4407.13.00S-P-F Scaffold Plank 2x10
Heavy-duty S-P-F scaffold planks in 2x10x12 ft dimensions, sawn, planed, and graded for construction scaffolding. The wood is from mixed S-P-F stands, with thickness over 6 mm, and fits this tariff item for S-P-F coniferous sawn lumber.
4407.13.00S-P-F Sheathing Plywood Base Lumber
Rough-sawn S-P-F lumber sheets prepared as base for sheathing, with thickness exceeding 6 mm and lengthwise chipping and planing. The wood is from mixed spruce, pine and fir stands, qualifying for this tariff item for S-P-F coniferous sawn wood.
4407.13.00S-P-F Studs 2x4 x 92-5/8 Inch
Pre-cut S-P-F wall studs at 92-5/8 inches for residential framing, sawn lengthwise, planed, and kiln-dried. The wood is from mixed S-P-F stands with unknown species proportions, thickness exceeds 6 mm, and it matches this tariff item for S-P-F sawn wood.