S-P-F Studs 2x4 x 92-5/8 Inch
Pre-cut S-P-F wall studs at 92-5/8 inches for residential framing, sawn lengthwise, planed, and kiln-dried. From mixed S-P-F stands with unknown species proportions, thickness exceeding 6 mm. Precisely matches this tariff item for S-P-F sawn wood.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +25.0% | 25% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the studs are exclusively pine
Pine-only studs are classified separately.
If the studs are exclusively fir
Fir-only studs fall under a different item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the studs are from mixed S-P-F stands and not a single species
• Ensure thickness exceeds 6 mm
• Keep kiln-drying and planing records for CBSA verification
Related Products under Tariff item 4407.13.00
S-P-F Beam 4x10 Timber
Sawn S-P-F structural beam with a 4x10 cross-section, end-jointed and sanded for load-bearing applications in construction. Sourced from mixed spruce-pine-fir stands where species proportions vary, meeting the subheading definition. Thickness exceeds 6 mm, qualifying as sawn coniferous wood under this tariff item.
S-P-F Construction Lumber 2x4
Kiln-dried S-P-F lumber measuring 2x4 inches by 8 feet, sourced from mixed spruce, pine, and fir stands where species proportions vary. Sawn lengthwise with thickness exceeding 6 mm, typically planed and end-jointed for construction use. Meets the S-P-F definition under subheading note 3.
S-P-F Decking Boards 5/4x6
Planed S-P-F decking boards in 5/4x6 size, sawn lengthwise for outdoor patio use, kiln-dried with eased edges. From indeterminate spruce-pine-fir proportions meeting the S-P-F definition. Thickness exceeds 6 mm, making it suitable for this tariff item.
S-P-F Furring Strips 1x3
Kiln-dried S-P-F furring strips with a 1x3 cross-section for wall and ceiling leveling, sawn and planed with thickness exceeding 6 mm. Sourced from mixed S-P-F stands per the subheading definition. Correctly classified under this tariff item as sawn coniferous wood.
S-P-F Joist Hangers Base Stock
S-P-F lumber strips sawn for joist hanger fabrication, planed to a thickness exceeding 6 mm from mixed spruce-pine-fir stands. In basic sawn or processed form, it fits this tariff item before any metal fitting assembly. The wood meets the S-P-F definition under subheading note 3.
S-P-F Kiln-Dried 2x6 Boards
Planed and sanded S-P-F boards in a 2x6 dimension, ideal for joists and rafters from mixed spruce-pine-fir forests. Thickness exceeds 6 mm after lengthwise sawing, and the boards are end-jointed for stability. Fits this tariff item as coniferous sawn wood.