S-P-F Sheathing Plywood Base Lumber
Rough-sawn S-P-F lumber sheets prepared as base for sheathing, with thickness exceeding 6 mm and lengthwise chipping and planing. The wood is from mixed spruce, pine and fir stands, qualifying for this tariff item for S-P-F coniferous sawn wood.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +25.0% | 25% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sheets are from a single species, not mixed S-P-F
This item is for pine sawn wood, not mixed S-P-F.
If the sheets are from another coniferous species
This item covers other coniferous sawn wood.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the lumber is not further processed into plywood, which would fall under a different heading
• Keep the sheets in a rough-sawn state without veneering
• Provide documentation of the mixed S-P-F source
Related Products under Tariff item 4407.13.00
S-P-F Beam 4x10 Timber
S-P-F beam timber, sawn from mixed spruce, pine and fir stands, with a 4x10 cross-section, end-jointed and sanded for structural use. It is over 6 mm thick and has not been further worked beyond sawing, planing or sanding, so it remains classified as sawn wood under this tariff item.
S-P-F Construction Lumber 2x4
Kiln-dried S-P-F construction lumber in standard 2x4 dimensions, sawn lengthwise and planed, with thickness over 6 mm. It comes from mixed spruce, pine and fir stands with unknown species proportions, meeting the S-P-F definition for this tariff item.
S-P-F Decking Boards 5/4x6
Planed S-P-F decking boards in 5/4x6 size, sawn lengthwise and kiln-dried for outdoor use. The wood is from mixed spruce, pine and fir stands with varying species proportions, and the thickness exceeds 6 mm, so it fits this tariff item for S-P-F sawn wood.
S-P-F Furring Strips 1x3
Kiln-dried S-P-F furring strips with a 1x3 cross-section, sawn and planed for wall and ceiling leveling. The thickness is over 6 mm, and the wood comes from mixed S-P-F stands, making it classifiable under this tariff item for S-P-F sawn wood.
S-P-F Joist Hangers Base Stock
S-P-F lumber strips sawn for use as base stock in joist hanger fabrication, planed to a thickness over 6 mm. The wood is from mixed spruce, pine and fir stands and is in a basic sawn form, so it falls under this tariff item before any metal fitting assembly.
S-P-F Kiln-Dried 2x6 Boards
Planed and sanded S-P-F boards in 2x6 dimensions, suitable for joists and rafters, sourced from mixed spruce, pine and fir forests. The boards are sawn lengthwise, exceed 6 mm in thickness, and are end-jointed, fitting this tariff item for S-P-F sawn wood.