Clad Aluminum Signage Backing Sheet
3 mm thick non-alloyed aluminum sheet clad for outdoor billboards and signs. HTS 7606.91.60.95 due to clad construction, purity, and sheet thickness parameters.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If embossed or hand-worked for signage
Surface-worked aluminum for signs moves to 7610.10.
If unclad with rect. cross-section
Basic rectangular unclad sheets use 7606.11.30.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Distinguish from litho stock by declaring general sheet vs printed substrate
• Document flat-rolled origin to confirm plate/sheet vs foil
Related Products under HTS 7606.91.60.95
Clad Aluminum Sheet for Aerospace Panels
A high-purity, non-alloyed aluminum sheet clad with a thin protective layer, measuring 5 mm thick, used in aircraft fuselage panels. It falls under HTS 7606.91.60.95 due to its clad construction, aluminum content over 99%, thickness between 0.2 mm and 6.3 mm, and plate/sheet form exceeding 0.2 mm.
Clad Aluminum Cookware Base Sheet
Non-alloyed aluminum sheet, 4.5 mm thick, clad on one side for corrosion resistance in cookware bottoms. Classified under HTS 7606.91.60.95 for its rectangular sheet form, thickness over 0.2 mm up to 6.3 mm, and clad non-alloyed aluminum composition.
Clad Aluminum Heat Exchanger Plate
4 mm thick clad plate of aluminum not alloyed, with brazing cladding for HVAC heat exchangers. HTS 7606.91.60.95 applies to its flat plate/sheet format, non-alloyed base exceeding 99% purity, and thickness specification.
Clad Aluminum Roofing Sheet
Non-alloyed aluminum sheet clad for weather resistance, 3.8 mm thick, cut to standard sizes for roofing applications. It matches HTS 7606.91.60.95 as a clad plate/sheet over 0.2 mm thick, ≤6.3 mm, with purity meeting non-alloyed criteria.
Clad Aluminum Trailer Side Panel Sheet
5.2 mm thick non-alloyed aluminum sheet with cladding for corrosion protection in truck trailer sides. Classified in HTS 7606.91.60.95 for clad, non-alloyed plates/sheets with thickness 0.2-6.3 mm.
Clad Aluminum Chemical Tank Liner Sheet
Pure aluminum sheet, 6 mm thick, clad internally for acid resistance in chemical storage tanks. HTS 7606.91.60.95 covers its non-alloyed clad plate form within the specified thickness range.