Of a width of 500 mm or more
Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: > Of other copper alloys: > Of a thickness of less than 5 mm: > Of a width of 500 mm or more
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Except as provided in headings 9903.88.13, 9903.88.18, 9903.88.33, 9903.88.34, 9903.88.35, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.40, 9903.88.41, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48, 9903.88.56, 9903.88.64, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(e) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(f)
Products classified under HTS 7409.90.50
C26000 Cartridge Brass Sheet 1.5mm Thick 600mm Wide
Wide sheet made from C26000 cartridge brass alloy (70% copper, 30% zinc), measuring 1.5mm thick and 600mm wide, exceeding 0.15mm thickness. Classified under HTS 7409.90.50 as a copper-zinc base alloy plate/sheet of other copper alloys, thickness less than 5mm, and width 500mm or more. Used in radiator cores and heat exchangers.
C44300 Admiralty Brass Strip 2mm x 610mm
C44300 admiralty brass (arsenic-modified copper-zinc alloy) strip, 2mm thick and 610mm wide, for condenser tubes. Fits HTS 7409.90.50 as copper-zinc base alloy (zinc predominant, tin <3%) sheet/strip over 0.15mm thick, under 5mm, width ≥500mm.
C70600 Copper-Nickel Sheet 3mm Thick 550mm Wide
90-10 copper-nickel alloy (C70600) sheet, 3mm thick x 550mm wide, for seawater piping. HTS 7409.90.50 applies to 'other copper alloys' not specified elsewhere, thickness 0.15-5mm, width ≥500mm; zinc ≤1% per note (d).
C46400 Naval Brass Plate 4.5mm x 700mm
High-tensile C46400 naval brass plate (tin-modified brass), 4.5mm thick, 700mm wide for propeller shafts. Copper-zinc base (note a) with tin <3%, classifies in 7409.90.50 for wide, thin alloy sheets.
C67500 Manganese Brass Sheet 1.8mm x 520mm
C67500 silicon-manganese brass sheet (Cu-Zn-Mn-Si alloy), 1.8mm thick, 520mm wide for architectural trim. Zinc predominant copper-zinc base alloy per note (a), HTS 7409.90.50 for wide thin sheets.
C28000 Muntz Metal Strip 2.2mm x 650mm
60-40 C28000 Muntz metal (high-zinc brass) strip, 2.2mm thick x 650mm wide for marine hardware. Standard copper-zinc alloy (note a), fits 7409.90.50 width/thickness specs.
C69430 Silicon Brass Sheet 3.2mm x 580mm
Leaded silicon brass C69430 sheet, 3.2mm x 580mm wide for valve components. Copper-zinc base with silicon addition (note a compliant), HTS 7409.90.50 category.
C83600 Leaded Red Brass Plate 1.2mm x 510mm
85-5-5-5 C83600 cast red brass hot-rolled to plate, 1.2mm x 510mm for bearings. Though cast alloy, rolled form qualifies as brass plate under 7409.90.50 specs.
C90500 Gun Metal Sheet 2.8mm x 620mm
C90500 gunmetal (88Cu-10Sn-2Zn) wrought sheet, 2.8mm thick x 620mm wide. Borderline bronze but zinc <10% and tin predominant classifies as 'other copper alloy' in 7409.90.50.
C95200 Aluminum Bronze Strip 4mm x 560mm
9% Al bronze C95200 strip, 4mm thick x 560mm wide for wear plates. 'Other copper alloys' neither brass/bronze/nickel per notes (a-d), thus 7409.90.50.
C86300 Wear-Resistant Bronze Sheet 1.9mm x 590mm
High-strength C86300 alloy (Cu-Zn-Al-Mn) sheet 1.9mm x 590mm for bushings. Zinc predominant classifies as brass per note (a), 7409.90.50 dimensions.
C90700 Semi-Red Brass Plate 3.5mm x 530mm
C90700 tin brass plate 3.5mm thick x 530mm wide for pump rods. Copper-zinc base with controlled tin <3%, standard 7409.90.50 classification.
C92700 High-Lead Tin Bronze Sheet 2.5mm x 640mm
C92700 bearing bronze sheet 2.5mm x 640mm wide. Tin base alloy (note b) classifies in 'other copper alloys' 7409.90.50 due to lead content.
C93700 High-Lead Tin Bronze Strip 1.6mm x 570mm
80-10-10 C93700 strip 1.6mm x 570mm for continuous casting bearings. Tin-copper base rolled strip in 7409.90.50 specs.
C95400 Aluminum Bronze Sheet 4.2mm x 600mm
C95400 high-aluminum bronze sheet 4.2mm thick x 600mm wide for gears. Non-principal alloy per notes (a-d), standard 7409.90.50 wide thin plate.