C95400 Aluminum Bronze Sheet 4.2mm x 600mm
C95400 high-aluminum bronze sheet 4.2mm thick x 600mm wide for gears. Non-principal alloy per notes (a-d), standard 7409.90.50 wide thin plate.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Heat treatment records verify temper condition
• Gear blank contouring doesn't change sheet classification
• Aerospace specs require AS9100 quality system
Related Products under HTS 7409.90.50
C26000 Cartridge Brass Sheet 1.5mm Thick 600mm Wide
Wide sheet made from C26000 cartridge brass alloy (70% copper, 30% zinc), measuring 1.5mm thick and 600mm wide, exceeding 0.15mm thickness. Classified under HTS 7409.90.50 as a copper-zinc base alloy plate/sheet of other copper alloys, thickness less than 5mm, and width 500mm or more. Used in radiator cores and heat exchangers.
C44300 Admiralty Brass Strip 2mm x 610mm
C44300 admiralty brass (arsenic-modified copper-zinc alloy) strip, 2mm thick and 610mm wide, for condenser tubes. Fits HTS 7409.90.50 as copper-zinc base alloy (zinc predominant, tin <3%) sheet/strip over 0.15mm thick, under 5mm, width ≥500mm.
C70600 Copper-Nickel Sheet 3mm Thick 550mm Wide
90-10 copper-nickel alloy (C70600) sheet, 3mm thick x 550mm wide, for seawater piping. HTS 7409.90.50 applies to 'other copper alloys' not specified elsewhere, thickness 0.15-5mm, width ≥500mm; zinc ≤1% per note (d).
C46400 Naval Brass Plate 4.5mm x 700mm
High-tensile C46400 naval brass plate (tin-modified brass), 4.5mm thick, 700mm wide for propeller shafts. Copper-zinc base (note a) with tin <3%, classifies in 7409.90.50 for wide, thin alloy sheets.
C67500 Manganese Brass Sheet 1.8mm x 520mm
C67500 silicon-manganese brass sheet (Cu-Zn-Mn-Si alloy), 1.8mm thick, 520mm wide for architectural trim. Zinc predominant copper-zinc base alloy per note (a), HTS 7409.90.50 for wide thin sheets.
C28000 Muntz Metal Strip 2.2mm x 650mm
60-40 C28000 Muntz metal (high-zinc brass) strip, 2.2mm thick x 650mm wide for marine hardware. Standard copper-zinc alloy (note a), fits 7409.90.50 width/thickness specs.