C86300 Wear-Resistant Bronze Sheet 1.9mm x 590mm
High-strength C86300 alloy (Cu-Zn-Al-Mn) sheet 1.9mm x 590mm for bushings. Zinc predominant classifies as brass per note (a), 7409.90.50 dimensions.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If phosphor bronze specific
P-content triggers dedicated subheading.
If semi-manufactured profiles
Non-rectangular sections classify as other articles.
If finished bushing blanks
Machined-to-size classifies as transmission parts.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Alloy registration with Copper Development Association recommended
• Tensile strength docs prevent downgrade to scrap classification
• Avoid mixed alloy lots; segregation required for customs
Related Products under HTS 7409.90.50
C26000 Cartridge Brass Sheet 1.5mm Thick 600mm Wide
Wide sheet made from C26000 cartridge brass alloy (70% copper, 30% zinc), measuring 1.5mm thick and 600mm wide, exceeding 0.15mm thickness. Classified under HTS 7409.90.50 as a copper-zinc base alloy plate/sheet of other copper alloys, thickness less than 5mm, and width 500mm or more. Used in radiator cores and heat exchangers.
C44300 Admiralty Brass Strip 2mm x 610mm
C44300 admiralty brass (arsenic-modified copper-zinc alloy) strip, 2mm thick and 610mm wide, for condenser tubes. Fits HTS 7409.90.50 as copper-zinc base alloy (zinc predominant, tin <3%) sheet/strip over 0.15mm thick, under 5mm, width ≥500mm.
C70600 Copper-Nickel Sheet 3mm Thick 550mm Wide
90-10 copper-nickel alloy (C70600) sheet, 3mm thick x 550mm wide, for seawater piping. HTS 7409.90.50 applies to 'other copper alloys' not specified elsewhere, thickness 0.15-5mm, width ≥500mm; zinc ≤1% per note (d).
C46400 Naval Brass Plate 4.5mm x 700mm
High-tensile C46400 naval brass plate (tin-modified brass), 4.5mm thick, 700mm wide for propeller shafts. Copper-zinc base (note a) with tin <3%, classifies in 7409.90.50 for wide, thin alloy sheets.
C67500 Manganese Brass Sheet 1.8mm x 520mm
C67500 silicon-manganese brass sheet (Cu-Zn-Mn-Si alloy), 1.8mm thick, 520mm wide for architectural trim. Zinc predominant copper-zinc base alloy per note (a), HTS 7409.90.50 for wide thin sheets.
C28000 Muntz Metal Strip 2.2mm x 650mm
60-40 C28000 Muntz metal (high-zinc brass) strip, 2.2mm thick x 650mm wide for marine hardware. Standard copper-zinc alloy (note a), fits 7409.90.50 width/thickness specs.