C69300 Arsenical Brass Sheet Coil 10mm Thick
C69300 heat-treated arsenical brass sheet coil 10 mm thick for connectors and battery terminals. HTS 7409.21.00.10 for copper-zinc base alloy coils ≥5mm. Arsenic as minor element (<1%) doesn't alter brass classification.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If copper-nickel base with low zinc
Ni predominant alloys ≤1% Zn use 7409.19; here zinc dominates.
If master alloys for remelting
Brass master alloys with specific compositions for remelt classify under 7406.
If foil <0.15mm thick
Brass foil thinner than 0.15mm shifts to Chapter 74 foil heading 7410.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Arsenic content declaration required under TSCA; provide safety data sheets
• Annealed condition must be specified; work-hardened may affect value declaration
• Verify coil OD/ID dimensions for proper packaging classification
Related Products under HTS 7409.21.00.10
C46400 Naval Brass Strip Coil 8mm Thick
C46400 naval brass (high zinc with minor tin <3%) in 8 mm thick coil form for marine hardware and propeller shafts. Falls under HTS 7409.21.00.10 as brass alloy strip in coils ≥5mm thick. Tin content below bronze threshold, qualifying as copper-zinc base alloy.
C37700 Forging Brass Plate Coil 5.5mm Thick
Lead-free C37700 forging brass plate in 5.5 mm thick coil, ideal for hot forging into valves and fittings. HTS 7409.21.00.10 applies to this copper-zinc base alloy in coil form ≥5mm thick. Zinc dominant composition fits brass subheading note (a).
C69430 Brass Alloy Strip Coil 6mm Thick
C69430 medium-leaded brass strip in 6 mm coil for plumbing components. Under HTS 7409.21.00.10 as brass ≥5mm thick in coils. Leaded but zinc base alloy per subheading note.
C35300 High-Leaded Brass Coil 5mm Thick
C35300 high-leaded (3% Pb) brass coil exactly 5 mm thick for machining bushings. HTS 7409.21.00.10: brass alloy plates/sheets/strip in coils ≥5mm. Lead as alloying element doesn't change copper-zinc base status.
C26000 Cartridge Brass Sheet Coil 6mm Thick
A high-zinc brass alloy (C26000) plate supplied in coil form with a thickness of 6 mm, used primarily for ammunition casings and architectural trim. Classified under HTS 7409.21.00.10 as copper-zinc base alloy plates/sheets/strip exceeding 0.15 mm thick, specifically in coils of 5 mm or more. Meets brass definition with zinc predominant over other elements.
C36000 Free-Cutting Brass Coil 7mm Thick
C36000 free-machining brass with sulfur addition, 7 mm thick coil for screw machine products. Classified HTS 7409.21.00.10: brass strip/plate in coils ≥5mm. Alloy meets brass criteria despite minor elements.