C35300 High-Leaded Brass Coil 5mm Thick
C35300 high-leaded (3% Pb) brass coil exactly 5 mm thick for machining bushings. HTS 7409.21.00.10: brass alloy plates/sheets/strip in coils ≥5mm. Lead as alloying element doesn't change copper-zinc base status.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If measured <5mm thick
Slightly thinner brass coils use companion statistical breakout.
If imitation jewelry components
Brass articles for jewelry end-use shift to Chapter 71.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Proposition 65 warnings required for leaded brass in California imports
• Thickness tolerance ±0.1mm common; declare nominal with test report
• Separate from <5mm coils to avoid blended duty averaging
Related Products under HTS 7409.21.00.10
C46400 Naval Brass Strip Coil 8mm Thick
C46400 naval brass (high zinc with minor tin <3%) in 8 mm thick coil form for marine hardware and propeller shafts. Falls under HTS 7409.21.00.10 as brass alloy strip in coils ≥5mm thick. Tin content below bronze threshold, qualifying as copper-zinc base alloy.
C37700 Forging Brass Plate Coil 5.5mm Thick
Lead-free C37700 forging brass plate in 5.5 mm thick coil, ideal for hot forging into valves and fittings. HTS 7409.21.00.10 applies to this copper-zinc base alloy in coil form ≥5mm thick. Zinc dominant composition fits brass subheading note (a).
C69300 Arsenical Brass Sheet Coil 10mm Thick
C69300 heat-treated arsenical brass sheet coil 10 mm thick for connectors and battery terminals. HTS 7409.21.00.10 for copper-zinc base alloy coils ≥5mm. Arsenic as minor element (<1%) doesn't alter brass classification.
C69430 Brass Alloy Strip Coil 6mm Thick
C69430 medium-leaded brass strip in 6 mm coil for plumbing components. Under HTS 7409.21.00.10 as brass ≥5mm thick in coils. Leaded but zinc base alloy per subheading note.
C26000 Cartridge Brass Sheet Coil 6mm Thick
A high-zinc brass alloy (C26000) plate supplied in coil form with a thickness of 6 mm, used primarily for ammunition casings and architectural trim. Classified under HTS 7409.21.00.10 as copper-zinc base alloy plates/sheets/strip exceeding 0.15 mm thick, specifically in coils of 5 mm or more. Meets brass definition with zinc predominant over other elements.
C36000 Free-Cutting Brass Coil 7mm Thick
C36000 free-machining brass with sulfur addition, 7 mm thick coil for screw machine products. Classified HTS 7409.21.00.10: brass strip/plate in coils ≥5mm. Alloy meets brass criteria despite minor elements.