C26000 Cartridge Brass Sheet Coil 6mm Thick
A high-zinc brass alloy (C26000) plate supplied in coil form with a thickness of 6 mm, used primarily for ammunition casings and architectural trim. Classified under HTS 7409.21.00.10 as copper-zinc base alloy plates/sheets/strip exceeding 0.15 mm thick, specifically in coils of 5 mm or more. Meets brass definition with zinc predominant over other elements.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made of refined copper without zinc alloying
Pure copper plates/sheets in coils ≥5mm thick classify under 7409.11.00, lacking the zinc predominance of brasses.
If thickness <5mm but >0.15mm
Brass coils thinner than 5mm shift to other brass plates/sheets/strip under 7409.29.00.
If supplied in straight lengths, not coils
Brass plates/sheets/strip ≥5mm thick but not in coils classify under 7407.22 for copper-zinc base alloys in straight form.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificate confirming alloy composition meets copper-zinc base alloy criteria (zinc > other elements, Ni <5%, Sn <3%)
• Verify thickness measurement per ASTM standards to ensure ≥5mm for this subheading; thinner coils fall to 7409.21.00.50
Related Products under HTS 7409.21.00.10
C46400 Naval Brass Strip Coil 8mm Thick
C46400 naval brass (high zinc with minor tin <3%) in 8 mm thick coil form for marine hardware and propeller shafts. Falls under HTS 7409.21.00.10 as brass alloy strip in coils ≥5mm thick. Tin content below bronze threshold, qualifying as copper-zinc base alloy.
C37700 Forging Brass Plate Coil 5.5mm Thick
Lead-free C37700 forging brass plate in 5.5 mm thick coil, ideal for hot forging into valves and fittings. HTS 7409.21.00.10 applies to this copper-zinc base alloy in coil form ≥5mm thick. Zinc dominant composition fits brass subheading note (a).
C69300 Arsenical Brass Sheet Coil 10mm Thick
C69300 heat-treated arsenical brass sheet coil 10 mm thick for connectors and battery terminals. HTS 7409.21.00.10 for copper-zinc base alloy coils ≥5mm. Arsenic as minor element (<1%) doesn't alter brass classification.
C69430 Brass Alloy Strip Coil 6mm Thick
C69430 medium-leaded brass strip in 6 mm coil for plumbing components. Under HTS 7409.21.00.10 as brass ≥5mm thick in coils. Leaded but zinc base alloy per subheading note.
C35300 High-Leaded Brass Coil 5mm Thick
C35300 high-leaded (3% Pb) brass coil exactly 5 mm thick for machining bushings. HTS 7409.21.00.10: brass alloy plates/sheets/strip in coils ≥5mm. Lead as alloying element doesn't change copper-zinc base status.
C36000 Free-Cutting Brass Coil 7mm Thick
C36000 free-machining brass with sulfur addition, 7 mm thick coil for screw machine products. Classified HTS 7409.21.00.10: brass strip/plate in coils ≥5mm. Alloy meets brass criteria despite minor elements.