PVC-Lined Galvanized EMT Conduit 3/4 Inch
Galvanized welded carbon steel conduit pipe, 3/4-inch trade size, wall thickness 1.07 mm, featuring internal PVC lining for moisture resistance, certified suitable for electrical wiring protection in dry/wet locations. The thin wall and coating make it ideal for electrical installations per electrical codes.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If wall thickness 1.65 mm or greater
Thicker wall welded circular steel tubes classify under the general 'other' provision regardless of coating.
If other cross-sectional shapes like square/rectangular
Non-circular hollow profiles, even for conduit, fall under 7306.90.
If imported as parts of specific pumps or machinery
Tubes imported expressly as parts of pumps shift to Chapter 84 machinery parts headings.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Galvanized exterior doesn't affect classification; focus documentation on internal non-insulating coating and conduit suitability
• UL 797 or equivalent listing required for proof of electrical conduit purpose; retain test reports
• Measure wall thickness precisely—over 1.65mm shifts to 7306.30.50 subheading
Related Products under HTS 7306.30.10.10
EMT Thin-Wall Steel Conduit 1/2 Inch
Welded steel tube with circular cross-section, wall thickness under 1.65 mm, internally coated with PVC for corrosion protection, explicitly designed and suitable for use as electrical conduit to protect wiring in buildings. Meets NEC standards for electrical metallic tubing (EMT). The non-electrically insulating internal lining distinguishes it from bare conduit.
Corrosion-Resistant EMT Conduit 1-1/4 Inch
Thin-wall (1.07 mm) welded carbon steel electrical conduit, 1-1/4 inch size, with internal polymer coating to prevent rust and wire damage, suitable for exposed electrical installations in industrial settings.
Flexible EMT Steel Conduit Adapter Tube 2 Inch
Short welded steel segment (2-inch trade size), wall thickness 1.5 mm, internally lined with non-conductive coating, designed as adapter section for EMT electrical conduit systems in junction boxes.
Epoxy-Coated Electrical Steel Conduit 1 Inch
Welded nonalloy steel tube, 1-inch diameter, wall 1.24 mm thick, internally lined with epoxy resin for chemical resistance, manufactured specifically for use as electrical metallic tubing (EMT) to encase conductors in commercial buildings.