Epoxy-Coated Electrical Steel Conduit 1 Inch
Welded nonalloy steel tube, 1-inch diameter, wall 1.24 mm thick, internally lined with epoxy resin for chemical resistance, manufactured specifically for use as electrical metallic tubing (EMT) to encase conductors in commercial buildings.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If internally coated with electrically insulating material
Electrically insulating coatings (e.g., certain plastics) have separate specific subheading.
If threaded or coupled fittings attached
Tube and pipe fittings of iron/nonalloy steel classify under Chapter 73 heading 7307.
If imported in sets with brackets/supports for retail
Conduit sold as retail electrical sets with accessories may classify as other steel articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Epoxy must be verified as non-electrically insulating (conductivity tests); provide material safety data sheets
• Labeling as 'electrical conduit' helps but needs technical specs confirming thin wall and suitability
Related Products under HTS 7306.30.10.10
EMT Thin-Wall Steel Conduit 1/2 Inch
Welded steel tube with circular cross-section, wall thickness under 1.65 mm, internally coated with PVC for corrosion protection, explicitly designed and suitable for use as electrical conduit to protect wiring in buildings. Meets NEC standards for electrical metallic tubing (EMT). The non-electrically insulating internal lining distinguishes it from bare conduit.
PVC-Lined Galvanized EMT Conduit 3/4 Inch
Galvanized welded carbon steel conduit pipe, 3/4-inch trade size, wall thickness 1.07 mm, featuring internal PVC lining for moisture resistance, certified suitable for electrical wiring protection in dry/wet locations. The thin wall and coating make it ideal for electrical installations per electrical codes.
Corrosion-Resistant EMT Conduit 1-1/4 Inch
Thin-wall (1.07 mm) welded carbon steel electrical conduit, 1-1/4 inch size, with internal polymer coating to prevent rust and wire damage, suitable for exposed electrical installations in industrial settings.
Flexible EMT Steel Conduit Adapter Tube 2 Inch
Short welded steel segment (2-inch trade size), wall thickness 1.5 mm, internally lined with non-conductive coating, designed as adapter section for EMT electrical conduit systems in junction boxes.