Corrosion-Resistant EMT Conduit 1-1/4 Inch
Thin-wall (1.07 mm) welded carbon steel electrical conduit, 1-1/4 inch size, with internal polymer coating to prevent rust and wire damage, suitable for exposed electrical installations in industrial settings.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made of stainless steel
Stainless versions of similar conduit classify under 7306.40 for other stainless tubes.
If for high-pressure boiler applications
Even coated, tubes for boilers/heat exchangers may go to seamless-like provisions in 7304.
If pre-insulated with electrical insulation
Insulated wire/cable with steel conduit armor classifies as insulated electric conductors.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Hot-dip galvanized versions still qualify if internal coating present; document both surface treatments
• Trade size vs actual OD/ID measurements critical for verification—include dimension charts
• Avoid bulk packaging confusion with 7306.30.50; prove conduit-specific design
Related Products under HTS 7306.30.10.10
EMT Thin-Wall Steel Conduit 1/2 Inch
Welded steel tube with circular cross-section, wall thickness under 1.65 mm, internally coated with PVC for corrosion protection, explicitly designed and suitable for use as electrical conduit to protect wiring in buildings. Meets NEC standards for electrical metallic tubing (EMT). The non-electrically insulating internal lining distinguishes it from bare conduit.
PVC-Lined Galvanized EMT Conduit 3/4 Inch
Galvanized welded carbon steel conduit pipe, 3/4-inch trade size, wall thickness 1.07 mm, featuring internal PVC lining for moisture resistance, certified suitable for electrical wiring protection in dry/wet locations. The thin wall and coating make it ideal for electrical installations per electrical codes.
Flexible EMT Steel Conduit Adapter Tube 2 Inch
Short welded steel segment (2-inch trade size), wall thickness 1.5 mm, internally lined with non-conductive coating, designed as adapter section for EMT electrical conduit systems in junction boxes.
Epoxy-Coated Electrical Steel Conduit 1 Inch
Welded nonalloy steel tube, 1-inch diameter, wall 1.24 mm thick, internally lined with epoxy resin for chemical resistance, manufactured specifically for use as electrical metallic tubing (EMT) to encase conductors in commercial buildings.