HY-80 Hot-Rolled Alloy Steel Coil
HY-80 nickel-alloy steel hot-rolled coil (3.2 mm thick, 1300 mm wide) for naval applications. Under HTS 7225.30.70.00 as other hot-rolled alloy steel coil.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If high-strength yield specs
HY-80 exceeds high-strength steel minimums in US Note 72(a).
If tool steel variant
Alloy content matches tool steel definitions in Note 72(e).
If classified as carbon steel
CBP determination that alloy levels insufficient for Chapter 72 alloy heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• ITAR/export control docs may apply for military-grade alloys; check BIS requirements
• Confirm not heat-resisting steel (US Note 72(g)) despite Ni content
• Declare full chemical composition to avoid specialty steel headings
Related Products under HTS 7225.30.70.00
AISI 6150 Hot-Rolled Chromium-Vanadium Steel Coil
Hot-rolled AISI 6150 (0.5% Cr, 0.25% V) alloy steel coil, 2.9 mm thick, 1200 mm width for springs. HTS 7225.30.70.00 applies to this specification.
SCM415 Hot-Rolled Alloy Steel Coil
Japanese SCM415 (Cr-Mo) carburizing steel hot-rolled coil, 3.6 mm x 1050 mm. Classified HTS 7225.30.70.00 as other hot-rolled alloy coil.
34CrNiMo6 Hot-Rolled Alloy Steel Coil
EN 34CrNiMo6 (Ni-Cr-Mo) hot-rolled coil 4.0 mm thick, 1600 mm wide for heavy gears. HTS 7225.30.70.00 for other alloy hot-rolled products.
AISI 4330 Hot-Rolled Modified Alloy Steel Coil
AISI 4330V (Ni-Cr-Mo-V) hot-rolled coil, 2.4 mm x 850 mm for aerospace. Under HTS 7225.30.70.00 as other thin hot-rolled alloy coil.
15CrMo Hot-Rolled Alloy Steel Coil
Chinese 15CrMo (1.25% Cr, 0.5% Mo) alloy steel hot-rolled coil, 4.2 mm x 950 mm. Fits HTS 7225.30.70.00: other alloy, hot-rolled, thin coil.
AISI 4140 Hot-Rolled Alloy Steel Coil
Flat-rolled coil of AISI 4140 chromium-molybdenum alloy steel, hot-rolled with thickness 3 mm and width 1200 mm. Classified under HTS 7225.30.70.00 as alloy steel (not stainless), width over 600 mm, thickness under 4.75 mm, not further worked than hot-rolled, in coils, and not meeting high-strength steel criteria.