15CrMo Hot-Rolled Alloy Steel Coil
Chinese 15CrMo (1.25% Cr, 0.5% Mo) alloy steel hot-rolled coil, 4.2 mm x 950 mm. Fits HTS 7225.30.70.00: other alloy, hot-rolled, thin coil.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cold-formed or finished
Any cold-working after hot-rolling constitutes further processing.
If made into tubes/pipes
Fabricated into tubular products changes classification to Chapter 73.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Subject to potential AD duties from China; verify current orders
• Translate mill certs to English with certified composition analysis
• Confirm thickness tolerance stays under 4.75 mm limit
Related Products under HTS 7225.30.70.00
AISI 6150 Hot-Rolled Chromium-Vanadium Steel Coil
Hot-rolled AISI 6150 (0.5% Cr, 0.25% V) alloy steel coil, 2.9 mm thick, 1200 mm width for springs. HTS 7225.30.70.00 applies to this specification.
SCM415 Hot-Rolled Alloy Steel Coil
Japanese SCM415 (Cr-Mo) carburizing steel hot-rolled coil, 3.6 mm x 1050 mm. Classified HTS 7225.30.70.00 as other hot-rolled alloy coil.
34CrNiMo6 Hot-Rolled Alloy Steel Coil
EN 34CrNiMo6 (Ni-Cr-Mo) hot-rolled coil 4.0 mm thick, 1600 mm wide for heavy gears. HTS 7225.30.70.00 for other alloy hot-rolled products.
AISI 4330 Hot-Rolled Modified Alloy Steel Coil
AISI 4330V (Ni-Cr-Mo-V) hot-rolled coil, 2.4 mm x 850 mm for aerospace. Under HTS 7225.30.70.00 as other thin hot-rolled alloy coil.
AISI 4140 Hot-Rolled Alloy Steel Coil
Flat-rolled coil of AISI 4140 chromium-molybdenum alloy steel, hot-rolled with thickness 3 mm and width 1200 mm. Classified under HTS 7225.30.70.00 as alloy steel (not stainless), width over 600 mm, thickness under 4.75 mm, not further worked than hot-rolled, in coils, and not meeting high-strength steel criteria.
AISI 4340 Hot-Rolled Nickel-Chromium-Moly Steel Coil
Hot-rolled coil of AISI 4340 alloy steel (Ni-Cr-Mo) with 2.5 mm thickness and 1500 mm width, used for structural components. Falls under HTS 7225.30.70.00 as other hot-rolled alloy steel coils, width ≥600 mm, thickness <4.75 mm, excluding high-strength specs.