AISI 6150 Hot-Rolled Chromium-Vanadium Steel Coil
Hot-rolled AISI 6150 (0.5% Cr, 0.25% V) alloy steel coil, 2.9 mm thick, 1200 mm width for springs. HTS 7225.30.70.00 applies to this specification.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thicker than 4.75 mm
Separate thickness break within hot-rolled alloy steel coils.
If spring steel tool alloy
May meet chipper knife or tool steel notes with V content.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Vanadium content cert crucial; distinguishes from plain Cr-Mo grades
• No pattern in relief allowed; plain surface only for this heading
• Pre-entry classification ruling recommended for V-alloy blends
Related Products under HTS 7225.30.70.00
SCM415 Hot-Rolled Alloy Steel Coil
Japanese SCM415 (Cr-Mo) carburizing steel hot-rolled coil, 3.6 mm x 1050 mm. Classified HTS 7225.30.70.00 as other hot-rolled alloy coil.
34CrNiMo6 Hot-Rolled Alloy Steel Coil
EN 34CrNiMo6 (Ni-Cr-Mo) hot-rolled coil 4.0 mm thick, 1600 mm wide for heavy gears. HTS 7225.30.70.00 for other alloy hot-rolled products.
AISI 4330 Hot-Rolled Modified Alloy Steel Coil
AISI 4330V (Ni-Cr-Mo-V) hot-rolled coil, 2.4 mm x 850 mm for aerospace. Under HTS 7225.30.70.00 as other thin hot-rolled alloy coil.
15CrMo Hot-Rolled Alloy Steel Coil
Chinese 15CrMo (1.25% Cr, 0.5% Mo) alloy steel hot-rolled coil, 4.2 mm x 950 mm. Fits HTS 7225.30.70.00: other alloy, hot-rolled, thin coil.
AISI 4140 Hot-Rolled Alloy Steel Coil
Flat-rolled coil of AISI 4140 chromium-molybdenum alloy steel, hot-rolled with thickness 3 mm and width 1200 mm. Classified under HTS 7225.30.70.00 as alloy steel (not stainless), width over 600 mm, thickness under 4.75 mm, not further worked than hot-rolled, in coils, and not meeting high-strength steel criteria.
AISI 4340 Hot-Rolled Nickel-Chromium-Moly Steel Coil
Hot-rolled coil of AISI 4340 alloy steel (Ni-Cr-Mo) with 2.5 mm thickness and 1500 mm width, used for structural components. Falls under HTS 7225.30.70.00 as other hot-rolled alloy steel coils, width ≥600 mm, thickness <4.75 mm, excluding high-strength specs.