AISI 52100 Hot-Rolled Chrome Alloy Steel Coil
1.5 mm thick AISI 52100 (high-carbon Cr alloy) hot-rolled coil, 800 mm wide, precursor for bearings. HTS 7225.30.70.00 for other alloy hot-rolled coils.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If ball-bearing steel per note
52100 typically meets US Note 72(h) composition for bearing steel.
If semi-finished form
Insufficient flat-rolled characteristics (width/thickness ratio).
If annealed or normalized
Heat treatments beyond hot-rolling may qualify as further worked.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Note potential reclassification risk to bearing steel if certified for that end-use
• Ensure surface shows hot-rolled oxide layer, not polished
• Batch certificates required for traceability in quality-sensitive applications
Related Products under HTS 7225.30.70.00
AISI 6150 Hot-Rolled Chromium-Vanadium Steel Coil
Hot-rolled AISI 6150 (0.5% Cr, 0.25% V) alloy steel coil, 2.9 mm thick, 1200 mm width for springs. HTS 7225.30.70.00 applies to this specification.
SCM415 Hot-Rolled Alloy Steel Coil
Japanese SCM415 (Cr-Mo) carburizing steel hot-rolled coil, 3.6 mm x 1050 mm. Classified HTS 7225.30.70.00 as other hot-rolled alloy coil.
34CrNiMo6 Hot-Rolled Alloy Steel Coil
EN 34CrNiMo6 (Ni-Cr-Mo) hot-rolled coil 4.0 mm thick, 1600 mm wide for heavy gears. HTS 7225.30.70.00 for other alloy hot-rolled products.
AISI 4330 Hot-Rolled Modified Alloy Steel Coil
AISI 4330V (Ni-Cr-Mo-V) hot-rolled coil, 2.4 mm x 850 mm for aerospace. Under HTS 7225.30.70.00 as other thin hot-rolled alloy coil.
15CrMo Hot-Rolled Alloy Steel Coil
Chinese 15CrMo (1.25% Cr, 0.5% Mo) alloy steel hot-rolled coil, 4.2 mm x 950 mm. Fits HTS 7225.30.70.00: other alloy, hot-rolled, thin coil.
AISI 4140 Hot-Rolled Alloy Steel Coil
Flat-rolled coil of AISI 4140 chromium-molybdenum alloy steel, hot-rolled with thickness 3 mm and width 1200 mm. Classified under HTS 7225.30.70.00 as alloy steel (not stainless), width over 600 mm, thickness under 4.75 mm, not further worked than hot-rolled, in coils, and not meeting high-strength steel criteria.