CPM-10V Tool Steel Hot-Rolled Coil
CPM-10V powdered metallurgy tool steel hot-rolled coil (2.45% C, 7.4% V), 10 mm thick, 1600 mm wide, for wear-resistant knives. Under 7225.30.11.80 as other tool steel meeting high Cr/C criteria.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not in coils, universal mill plate specs
Cut lengths meeting note (b) width/thickness classify as universal mill plate.
If stainless, flat-rolled ≥600mm
High Cr (>10.5%) stainless tool steel may fall under Chapter 72 stainless provisions.
If imported as machine part, not raw coil
Fabricated into finished tooling components shifts to machinery parts classification.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• PM tool steels need detailed analysis; V/Cr content proves note (e)(i) classification
• Coil ID must confirm ≥600 mm width; strip widths go to 7225.99 or Chapter 72 narrower provisions
• Document hot-rolling only—no cold reduction disqualifies from this hot-rolled subheading
Related Products under HTS 7225.30.11.80
D2 Tool Steel Hot-Rolled Coil
Hot-rolled coil of D2 tool steel (1.5% C, 12% Cr), 6 mm thick and 1500 mm wide, used for making shear blades and punches. Classified under HTS 7225.30.11.80 as flat-rolled alloy tool steel, not further worked than hot-rolled, in coils, thickness over 4.75 mm, other than specific described types. Meets tool steel definition with >1.2% C and >10.5% Cr per chapter note (e).
A2 Tool Steel Hot-Rolled Coil
Hot-rolled coil of A2 air-hardening tool steel (1% C, 5% Cr), 5.5 mm thick, 1200 mm wide, for forming dies and gauges. Falls under 7225.30.11.80 as other tool steel hot-rolled coils ≥4.75 mm thick, meeting tool steel criteria with ≥0.3% C and 1.25-10.5% Cr.
O1 Tool Steel Hot-Rolled Coil
Hot-rolled O1 oil-hardening tool steel coil (0.9% C, 1% Mn), 8 mm thick, 1800 mm wide, for cutting tools and fixtures. HTS 7225.30.11.80 applies to this other tool steel coil, qualifying via note (e)(iii) with ≥0.85% C and 1-1.8% Mn.
S7 Tool Steel Hot-Rolled Coil
Shock-resistant S7 tool steel hot-rolled coil (0.5% C, 3.5% Mo), 7 mm thick, 1000 mm wide, for punches and shear knives. Classified 7225.30.11.80 as other tool steel per note (e)(v) molybdenum content.
M2 Tool Steel Hot-Rolled Coil
M2 high-speed tool steel coil (0.85% C, 6% W, 5% Mo), 4.8 mm thick, 1400 mm wide, for drill bits and end mills. HTS 7225.30.11.80 for other hot-rolled tool steel coils ≥4.75 mm, via note (e)(vi) tungsten content.