Other
Flat-rolled products of stainless steel, of a width of less than 600 mm: > Other > Containing more than 0.5 percent but less than 24 percent by weight of nickel: > Other
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7220.90.00.15
Nickel 6% Stainless Spring Stock
Spring temper stainless flat wire substitute, 80 mm wide, 0.4 mm thick, 6% nickel. HTS 7220.90.0015 other <600 mm stainless. For flat springs and clips.
310 Stainless Steel High-Temp Furnace Strip
310 heat-resistant stainless strip, 400 mm wide, 1.0 mm thick, 19-22% nickel, 24-26% Cr. HTS 7220.90.0015 other stainless flats <600 mm. Furnace muffles and radiant tubes.
Custom 15-5 PH Stainless Aerospace Sheet
15-5 PH martensitic PH stainless sheet, 300 mm wide, 2.5 mm thick, 3.5-5.5% nickel. HTS 7220.90.0015 other stainless <600 mm. Landing gear and structural aerospace.
AISI 304 Stainless Steel Strip for Appliances
Flat-rolled stainless steel strip of AISI 304 grade, width 500 mm, thickness 0.8 mm, containing 8-10.5% nickel and 18-20% chromium. Classified under HTS 7220.90.0015 as a flat-rolled product of stainless steel less than 600 mm wide, not elsewhere specified, with nickel content between 0.5% and 24%. Used primarily for fabricating kitchen appliance panels and trim.
Monel 400 Alloy Strip (Ni 65%)
Flat-rolled Monel 400 nickel-copper stainless strip, 550 mm wide, 0.6 mm thick, with approximately 65% nickel and copper balance. Classifies in HTS 7220.90.0015 as other stainless flat-rolled <600 mm with 0.5-24% nickel (effective for certain alloys). Used in marine hardware and valves.
Stainless Steel Edging Trim Stock
Flat-rolled stainless edging strip, 150 mm wide, 0.7 mm thick, 2-5% nickel alloy. HTS 7220.90.0015 for other stainless <600 mm flats. Stock for furniture and architectural trim fabrication.
Duplex 2205 Stainless Steel Plate Strip
Duplex 2205 (UNS S31803) flat strip, 500 mm wide, 2 mm thick, 4.5-6.5% nickel. Fits HTS 7220.90.0015 as other stainless flat-rolled <600 mm with qualifying nickel. High-strength for offshore platforms and pressure vessels.
17-4 PH Precipitation Hardening Stainless Strip
17-4 PH (630) stainless strip, 350 mm wide, 1.5 mm thick, 3-5% nickel, precipitation hardenable. HTS 7220.90.0015 other stainless <600 mm. Aerospace and valve components stock.
409 Stainless Steel Automotive Trim Strip
409 ferritic stainless strip for exhaust trim, 250 mm wide, 0.8 mm thick, ~1% nickel. HTS 7220.90.0015 other stainless <600 mm. Automotive heat-resistant trim.
304L Low Carbon Stainless Band
304L low-carbon variant stainless band, 100 mm wide, 0.5 mm thick, 8-10.5% nickel. HTS 7220.90.0015 for other low-Ni stainless flats <600 mm. Welding-sensitive applications like tanks.
316L Stainless Steel Foil for Chemical Processing
Thin flat-rolled 316L stainless steel foil, 300 mm wide, 0.05 mm thick, with 10-14% nickel and 16-18% molybdenum-enhanced chromium. Fits HTS 7220.90.0015 as other flat-rolled stainless steel <600 mm wide with 0.5-24% nickel, not cold-rolled in specific forms. Ideal for corrosion-resistant linings in chemical equipment.
321 Stainless Steel Sheet for Exhaust Systems
Flat-rolled 321 stabilized stainless steel sheet, 450 mm wide, 1.2 mm thick, containing 9-12% nickel and titanium-stabilized chromium. Under HTS 7220.90.0015 for other stainless steel flat products <600 mm wide with mid-range nickel. Used in automotive exhaust components for high-temperature resistance.
430 Stainless Steel Banding Strap
Flat-rolled 430 ferritic stainless steel banding, 50 mm wide, 0.4 mm thick, with 0.5-1% nickel max but qualifying stainless via chromium. HTS 7220.90.0015 for other <600 mm stainless flats with low-mid nickel. For securing cargo and industrial packaging.
304 Stainless Steel Slit Coil for Tubing
Precision-slit coil of 304 stainless steel, 400 mm wide, 1.0 mm thick, 8-10.5% nickel. HTS 7220.90.0015 covers other flat-rolled stainless <600 mm not cold-formed or worked. Intermediate for welded tubing in food/pharma industries.
316 Stainless Steel Shim Stock
Thin precision shim stock of 316 stainless, 200 mm wide, 0.03-0.1 mm thick, 10-14% nickel. Classed HTS 7220.90.0015 as other stainless flat <600 mm. For machinery alignment and spacers in industrial equipment.