Hastelloy C-276 Equivalent Sheet
Ni-Cr-Mo stainless sheet ~16% nickel, 4% molybdenum approx., <600 mm wide for chemical reactors. Classed in HTS 7220.90.0010 as flat-rolled stainless meeting Ni/Mo weight percentages.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If clad or plated
Cladding constitutes further working, shifting to clad alloy steel in 7226.
If high-strength steel per note (a)
Meets yield point criteria for high-strength, separate from stainless in 7210.
If made into hollow drill bars
Formed into specific hollow drill profiles classifies under 7228 semi-finished.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Chemical analysis report essential for Mo verification 1.5-5%
• Stainless status requires min 10.5% Cr
• No duty relief for surface rust at entry
Related Products under HTS 7220.90.00.10
Custom Mo-Bearing Stainless Foil
Tailored thin stainless foil with 2% nickel, 1.8% molybdenum, <600 mm wide for electronics shielding. Fits HTS 7220.90.0010: flat-rolled stainless steel with required Ni/Mo per statistical breakout.
316Mo Stainless Steel Band
Enhanced 316 stainless band with 12% nickel and 2.5% molybdenum, flat-rolled <600 mm for surgical tools. HTS 7220.90.0010 captures its stainless flat-rolled nature and alloy specs.
17-4PH Stainless Steel Sheet
Precipitation-hardening stainless steel sheet with approximately 4% nickel and 3.5% molybdenum, width under 600 mm, used in aerospace components. Falls under HTS 7220.90.0010 due to its stainless steel composition, flat-rolled form less than 600 mm wide, nickel content between 0.5-24%, and molybdenum 1.5-5%. Not further worked beyond basic rolling.
Custom 904L Stainless Steel Strip
High corrosion-resistant stainless strip with 1-2% nickel and 4% molybdenum, narrow width under 600 mm for chemical processing equipment. Classified in HTS 7220.90.0010 for flat-rolled stainless steel with specified nickel and molybdenum ranges, not in coils or further processed.
Alloy 254 SMO Steel Plate
Super austenitic stainless steel plate with 18% nickel and 2.5% molybdenum, under 600 mm wide for marine applications. HTS 7220.90.0010 applies to its flat-rolled stainless form, mid-range nickel, and precise molybdenum content per U.S. notes.
AL-6XN Stainless Steel Foil
Thin flat-rolled stainless foil with 21% nickel and 2.4% molybdenum, width <600 mm for heat exchanger manufacturing. Fits HTS 7220.90.0010 as stainless, flat-rolled under 600 mm with qualifying alloy elements, not further worked.