316Mo Stainless Steel Band
Enhanced 316 stainless band with 12% nickel and 2.5% molybdenum, flat-rolled <600 mm for surgical tools. HTS 7220.90.0010 captures its stainless flat-rolled nature and alloy specs.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If ball-bearing steel per note (h)
Specific C/Cr/Si composition defines ball-bearing steel subheading.
If cold-rolled >3 mm thick
Thicker cold-rolled non-stainless alloy uses 7219; stainless stays 7220.
If drawn into chain links
Processed into chain becomes articles of iron/steel in 7318.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify against razor blade steel note (d) exclusion if thin/narrow
• Ensure no varnishing or painting
• Width documentation critical
Related Products under HTS 7220.90.00.10
Custom Mo-Bearing Stainless Foil
Tailored thin stainless foil with 2% nickel, 1.8% molybdenum, <600 mm wide for electronics shielding. Fits HTS 7220.90.0010: flat-rolled stainless steel with required Ni/Mo per statistical breakout.
Hastelloy C-276 Equivalent Sheet
Ni-Cr-Mo stainless sheet ~16% nickel, 4% molybdenum approx., <600 mm wide for chemical reactors. Classed in HTS 7220.90.0010 as flat-rolled stainless meeting Ni/Mo weight percentages.
17-4PH Stainless Steel Sheet
Precipitation-hardening stainless steel sheet with approximately 4% nickel and 3.5% molybdenum, width under 600 mm, used in aerospace components. Falls under HTS 7220.90.0010 due to its stainless steel composition, flat-rolled form less than 600 mm wide, nickel content between 0.5-24%, and molybdenum 1.5-5%. Not further worked beyond basic rolling.
Custom 904L Stainless Steel Strip
High corrosion-resistant stainless strip with 1-2% nickel and 4% molybdenum, narrow width under 600 mm for chemical processing equipment. Classified in HTS 7220.90.0010 for flat-rolled stainless steel with specified nickel and molybdenum ranges, not in coils or further processed.
Alloy 254 SMO Steel Plate
Super austenitic stainless steel plate with 18% nickel and 2.5% molybdenum, under 600 mm wide for marine applications. HTS 7220.90.0010 applies to its flat-rolled stainless form, mid-range nickel, and precise molybdenum content per U.S. notes.
AL-6XN Stainless Steel Foil
Thin flat-rolled stainless foil with 21% nickel and 2.4% molybdenum, width <600 mm for heat exchanger manufacturing. Fits HTS 7220.90.0010 as stainless, flat-rolled under 600 mm with qualifying alloy elements, not further worked.