Duplex 2205 Stainless Cold-Rolled Strip 0.4mm Thick 60mm Wide
Duplex 2205 stainless steel strip cold-rolled to 0.4 mm thickness x 60 mm width, not further worked. Classified in HTS 7220.20.70.80 as other stainless flat-rolled product meeting dimension criteria. Corrosion-resistant for oil & gas sectors.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If bars/rods not flat-rolled
Circular cross-section products classify as bars under 7213, not flat shapes.
If >- if width 300-600 mm and further worked (e.g., phosphatized)
Combines width and surface treatment to different subheading.
If parts for mining machinery
Functional parts classification prevails over material in Chapter 84/85.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Dual-phase microstructure certification differentiates duplex from standard stainless
• Ensure strip edges are mill-finished, not trimmed (which could be further working)
• Section 232 tariffs may apply; check steel quantity restrictions
Related Products under HTS 7220.20.70.80
430 Stainless Steel Cold-Rolled Strip 0.5mm Thick 25mm Wide
This is a flat-rolled 430 stainless steel strip, cold-rolled to a thickness of 0.5 mm and width of 25 mm, not further worked beyond cold-reduction. It falls under HTS 7220.20.70.80 as it meets the criteria for stainless steel, width under 300 mm, thickness between 0.25 mm and 1.25 mm, and is classified as 'other' cold-rolled product. Commonly used in appliance trim and decorative applications.
304 Stainless Steel Cold-Rolled Sheet 0.8mm Thick 50mm Wide
A 304 austenitic stainless steel sheet cold-rolled to 0.8 mm thickness and 50 mm width, without additional processing beyond cold-reduction. Classified under HTS 7220.20.70.80 due to stainless steel composition, width <300 mm, and thickness in the 0.25-1.25 mm range as 'other' product. Ideal for kitchen equipment components and hardware.
316L Stainless Steel Cold-Rolled Strip 1.0mm Thick 15mm Wide
Cold-rolled 316L stainless steel strip at 1.0 mm thickness and 15 mm width, not further worked. Fits HTS 7220.20.70.80 for stainless flat-rolled products under 300 mm wide, 0.25-1.25 mm thick, 'other' category. Used in marine hardware and chemical processing equipment.
409 Stainless Steel Cold-Rolled Band 0.6mm Thick 100mm Wide
Ferritic 409 stainless steel cold-rolled band, 0.6 mm thick by 100 mm wide, not further worked than cold-reduced. Matches HTS 7220.20.70.80 specifications for 'other' stainless flat products <300 mm wide. Applied in automotive exhaust systems.
321 Stainless Steel Cold-Rolled Foil Alternative 0.3mm Thick 40mm Wide
Stabilized 321 stainless steel cold-rolled product at 0.3 mm thickness and 40 mm width, classified as 'other' under HTS 7220.20.70.80 for dimensions and processing. Not further worked beyond cold-rolling. Suited for high-temperature exhaust components.
High-Strength 301 Stainless Cold-Rolled Strip 1.2mm Thick 20mm Wide
301 spring-temper stainless steel strip cold-rolled to 1.2 mm x 20 mm, not further worked. HTS 7220.20.70.80 applies to this 'other' stainless flat-rolled product within specified width and thickness limits. Used in fasteners and clips.