High-Strength 301 Stainless Cold-Rolled Strip 1.2mm Thick 20mm Wide
301 spring-temper stainless steel strip cold-rolled to 1.2 mm x 20 mm, not further worked. HTS 7220.20.70.80 applies to this 'other' stainless flat-rolled product within specified width and thickness limits. Used in fasteners and clips.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If matching tool steel composition
Chapter 72 note (e) tool steel criteria supersede general stainless classification.
If plated/coated surface
Plating constitutes further working, moving to 7210 for non-stainless or different hierarchy.
If manufactured into brackets
Finished articles of stainless steel classify under Chapter 73 based on end product.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify minimum yield strength if claiming high-strength steel note, though primarily for carbon steels
• Prevent coiling tight enough to cause work-hardening that might be seen as further processing
• Accurate weight declarations crucial as duties often weight-based for steel
Related Products under HTS 7220.20.70.80
430 Stainless Steel Cold-Rolled Strip 0.5mm Thick 25mm Wide
This is a flat-rolled 430 stainless steel strip, cold-rolled to a thickness of 0.5 mm and width of 25 mm, not further worked beyond cold-reduction. It falls under HTS 7220.20.70.80 as it meets the criteria for stainless steel, width under 300 mm, thickness between 0.25 mm and 1.25 mm, and is classified as 'other' cold-rolled product. Commonly used in appliance trim and decorative applications.
304 Stainless Steel Cold-Rolled Sheet 0.8mm Thick 50mm Wide
A 304 austenitic stainless steel sheet cold-rolled to 0.8 mm thickness and 50 mm width, without additional processing beyond cold-reduction. Classified under HTS 7220.20.70.80 due to stainless steel composition, width <300 mm, and thickness in the 0.25-1.25 mm range as 'other' product. Ideal for kitchen equipment components and hardware.
316L Stainless Steel Cold-Rolled Strip 1.0mm Thick 15mm Wide
Cold-rolled 316L stainless steel strip at 1.0 mm thickness and 15 mm width, not further worked. Fits HTS 7220.20.70.80 for stainless flat-rolled products under 300 mm wide, 0.25-1.25 mm thick, 'other' category. Used in marine hardware and chemical processing equipment.
409 Stainless Steel Cold-Rolled Band 0.6mm Thick 100mm Wide
Ferritic 409 stainless steel cold-rolled band, 0.6 mm thick by 100 mm wide, not further worked than cold-reduced. Matches HTS 7220.20.70.80 specifications for 'other' stainless flat products <300 mm wide. Applied in automotive exhaust systems.
321 Stainless Steel Cold-Rolled Foil Alternative 0.3mm Thick 40mm Wide
Stabilized 321 stainless steel cold-rolled product at 0.3 mm thickness and 40 mm width, classified as 'other' under HTS 7220.20.70.80 for dimensions and processing. Not further worked beyond cold-rolling. Suited for high-temperature exhaust components.
17-4 PH Stainless Steel Cold-Rolled Sheet 0.9mm Thick 80mm Wide
Precipitation-hardening 17-4 PH stainless steel cold-rolled sheet, 0.9 mm thick, 80 mm wide, without further working. Fits 'other' category of HTS 7220.20.70.80 for stainless cold-rolled flats <300 mm wide. Aerospace and medical applications.