410 Martensitic Stainless Cold-Rolled Sheet 0.65 mm
Hardenable 410 martensitic stainless steel cold-rolled to 0.65 mm thickness, over 600 mm wide, mill surface only. HTS 7219.34.00 for cold-reduced stainless not further worked in this gauge range.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If electrical non-grain oriented
Silicon-electrical stainless variants have dedicated electrical sheet subheadings.
If cut into knife blanks
Pre-cutlery components shift from flat stock to Chapter 82 articles.
If semi-finished (thicker than 4.75 mm)
Semi-finished stainless products above certain thickness classify earlier in Chapter 72.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify martensitic family in entry docs; test for magnetic properties confirming grade; beware of hardness specs triggering tool steel notes
Related Products under HTS 7219.34.00
Type 304 Cold-Rolled Stainless Steel Sheet 0.8 mm Thick
Flat-rolled stainless steel sheet made from AISI Type 304 alloy, cold-rolled to a precise thickness of 0.8 mm and width exceeding 600 mm, not further worked beyond cold reduction. This product falls under HTS 7219.34.00 due to its stainless steel composition, cold-rolled state without additional surface treatments like polishing or coating, and thickness between 0.5 mm and 1 mm.
430 Grade Cold-Reduced Stainless Steel Coil 0.7 mm
Cold-rolled coil of 430 ferritic stainless steel, 0.7 mm thick and over 600 mm wide, supplied in annealed and pickled condition without further surface treatments. Classified under 7219.34.00 as flat-rolled stainless steel, cold-rolled, within the specified thickness range, and not further worked.
316L Stainless Steel Cold-Rolled Sheet 0.9 mm for Appliances
Low-carbon 316L austenitic stainless steel sheet, cold-rolled to 0.9 mm thickness and 1200 mm width, not further worked, ideal for appliance panels. Meets HTS 7219.34.00 as stainless steel flat-rolled product, cold-reduced, 0.5-1 mm thick, over 600 mm wide.
409 Stainless Steel Cold-Rolled Automotive Trim Sheet 0.6 mm
Ferritic 409 grade stainless steel cold-rolled sheet at 0.6 mm thickness, 1000 mm wide, without further working, used for vehicle trim. Falls under 7219.34.00 for its cold-rolled stainless steel characteristics within the exact thickness and width parameters.
Type 304 Cold-Rolled Stainless Steel Sheet 1 mm Max
Precision cold-rolled Type 304 stainless sheet exactly 1 mm thick, 1500 mm wide coils, not further worked beyond reduction. HTS 7219.34.00 applies to this stainless flat-rolled product due to cold-rolled finish, thickness limit, and lack of additional treatments.
317 Stainless Steel Cold-Reduced Sheet 0.75 mm
Austenitic 317 stainless steel cold-reduced sheet, 0.75 mm thick and 800 mm wide, in as-rolled condition without polishing or coating. Classified in 7219.34.00 as not further worked cold-rolled stainless within precise dimensional specs.