321 Cold-Rolled Stainless Steel Sheet 1.2mm
Stabilized 321 stainless steel cold-rolled sheet for high-temperature service, 1.2 mm thickness, 1250 mm width. Meets HTS 7219.33.00 criteria: stainless, cold-reduced only, 1-3 mm thick, coilable width over 600 mm.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If narrow strip less than 600 mm
Even cold-rolled stainless profiles/strips under 600 mm width classify under 7226.
If further worked with nonmetallic coating
Plastic coating or painting applied post-rolling constitutes 'further worked' per Chapter note, using 7219.24.
If made into boiler tubes
Fabricated into seamless stainless tubes for boilers, shifts from flat-rolled to tubes heading 7304.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• High-temperature certification may be required for end-use validation
• Ensure mill edges are not trimmed (trimming = further worked)
• Common error: confusing with hot-rolled 321 under 7219.14
Related Products under HTS 7219.33.00
304 Cold-Rolled Stainless Steel Sheet 2mm Thick
Flat-rolled 304 stainless steel sheet, cold-rolled, with thickness of 2 mm and width over 600 mm, not further worked beyond cold-reduction. Classifies under HTS 7219.33.00 due to stainless steel composition, specified thickness range (1-3 mm), and lack of additional surface treatments like polishing or coating.
316L Cold-Reduced Stainless Steel Plate 1.5mm
Cold-reduced 316L stainless steel flat-rolled product, 1.5 mm thick, width exceeding 600 mm, used in chemical processing equipment. Fits HTS 7219.33.00 as stainless steel, cold-rolled without further working, within 1-3 mm thickness per chapter definitions.
430 Cold-Rolled Stainless Steel Sheet 2.5mm Thick
Ferritic 430 grade stainless steel sheet, cold-rolled to 2.5 mm thickness, width 1000 mm, not further worked. HTS 7219.33.00 applies to all stainless flat-rolled products meeting width, thickness, and cold-rolled criteria regardless of specific alloy.
201 Cold-Rolled Stainless Steel Coil 1.8mm
Austenitic 201 stainless steel cold-rolled coil, 1.8 mm thick, 1500 mm width, supplied in master coils for slitting. Classifies precisely under 7219.33.00 for cold-reduced stainless flat products, thickness 1-3 mm, wide format, no further working.
409 Cold-Rolled Stainless Steel Automotive Sheet 2.2mm
Ferritic 409 stainless steel sheet cold-rolled for exhaust components, 2.2 mm thick, 1200 mm width. HTS 7219.33.00 classification based on stainless steel, cold-rolled process only, thickness exceeding 1 mm but under 3 mm.
304L Cold-Rolled Stainless Steel Mill Edge Sheet 1.6mm
Low-carbon 304L stainless cold-rolled sheet with mill edges, 1.6 mm gauge, 1524 mm width for appliance manufacturing. Falls under HTS 7219.33.00 as not further worked cold-reduced stainless flat-rolled product in specified thickness.