Type 304 Cold-Rolled Stainless Steel Sheet 3.5mm Thick
Flat-rolled stainless steel sheet of Type 304 alloy, cold-rolled to a thickness of 3.5 mm and width exceeding 600 mm, not further worked beyond cold-reduction. This product falls under HTS 7219.32.00 due to its stainless steel composition, specified thickness range of 3-4.75 mm, and lack of additional surface treatments like polishing or coating. Commonly used in industrial fabrication requiring corrosion resistance.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If polished, coated, or clad
Further worked surfaces like polishing or metal coating move classification to 7219.33 per Chapter 72 notes on 'further worked' treatments.
If width under 600 mm
Narrower stainless steel strips (less than 600 mm width) fall under heading 7220, regardless of thickness or processing.
If hot-rolled instead of cold-rolled
Hot-rolled stainless sheets in this thickness range classify under 7219.22, as cold-rolling defines the subheading distinction.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify exact thickness and width measurements to confirm 7219.32.00 classification; provide mill test certificate verifying stainless steel composition
• Avoid common pitfalls like misclassifying polished surfaces under 7219.33; declare as 'not further worked' explicitly
Related Products under HTS 7219.32.00
409 Cold-Rolled Stainless Steel Sheet 3.9mm Thick
Ferritic automotive-grade Type 409 stainless sheet cold-rolled to 3.9 mm, width 600 mm or more, plain cold-reduced surface. Classifies under HTS 7219.32.00 for thickness-specific cold-rolled stainless flat-rolled products, used in exhaust systems.
Type 316L Cold-Rolled Stainless Steel Plate 4mm Thick
Cold-reduced stainless steel plate of low-carbon Type 316L, measuring 4 mm thick with width over 600 mm, supplied in not further worked condition. Classified in HTS 7219.32.00 for its cold-rolled stainless steel properties within the 3-4.75 mm thickness band, ideal for marine and chemical processing equipment.
430 Cold-Rolled Stainless Steel Sheet 3.2mm Thick
Ferritic Type 430 stainless steel flat-rolled sheet, cold-rolled to 3.2 mm thickness and minimum 600 mm width, without further processing. HTS 7219.32.00 applies to this cold-reduced stainless product in the designated thickness range, suitable for automotive trim and appliance exteriors.
Duplex 2205 Cold-Rolled Stainless Steel Sheet 3.8mm
High-strength Duplex 2205 stainless steel sheet, cold-rolled to 3.8 mm thick with width of 600 mm or more, not subjected to further working. Fits HTS 7219.32.00 precisely for cold-reduced stainless flat-rolled products in this thickness, used in oil & gas piping.
17-4 PH Precipitation Hardening Stainless Sheet 3.6mm
Precipitation-hardening 17-4 PH stainless steel cold-rolled sheet at 3.6 mm thickness, over 600 mm wide, not further worked. HTS 7219.32.00 covers this cold-reduced stainless flat product due to thickness specs and absence of cladding or enameling.
310 Cold-Rolled Stainless Steel Sheet 4.2mm Thick
High-temperature Type 310 stainless steel flat-rolled sheet, cold-rolled to 4.2 mm thickness exceeding 600 mm width, without additional surface treatments. Directly matches HTS 7219.32.00 for cold-reduced stainless in 3-4.75 mm range, for furnace and heat exchanger parts.