Cold-Rolled Low Carbon Flat Steel Wire 2mm Thick
Flat wire made from nonalloy steel containing less than 0.25% carbon, with a thickness of 2mm and width of 10mm, not plated or coated. It falls under HTS 7217.10.30.00 as it meets the criteria for flat wire exceeding 1.25mm thickness in Chapter 72 for iron and nonalloy steel products. Commonly used in industrial binding and reinforcement applications.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness is 1.25 mm or less
Thinner flat wire in the same not plated/not coated, low carbon category falls under the preceding subheading.
If considered 'other bars and rods' rather than wire
Flat products not meeting wire profile (high width-to-thickness ratio) may classify as bars/rods in heading 7215.
If carbon content is 0.25% or more
Exceeding the low carbon threshold moves it to the subheading for flat wire with higher carbon content.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify carbon content is below 0.25% with mill test certificates to avoid reclassification to higher carbon headings
• Measure thickness precisely as products ≤1.25mm shift to HTS 7217.10.20; provide dimensional documentation at entry
• Ensure no plating or coating; even minimal surface treatments like oiling may require declaration under 'further worked' notes
Related Products under HTS 7217.10.30.00
1.5mm Thick Polished Low Carbon Flat Wire
Polished flat wire of nonalloy steel with <0.25% carbon, 1.5mm thick and 15mm wide, suitable for springs and clips. Classified under HTS 7217.10.30.00 for unplated flat wire exceeding 1.25mm thickness per Chapter 72 definitions. Polishing is permitted without changing classification.
2.5mm x 20mm Low Carbon Flat Binding Wire
Flat binding wire from low carbon nonalloy steel, 2.5mm thick, used in construction and packaging strapping. Meets HTS 7217.10.30.00 specifications for not plated/coated flat wire >1.25mm thick with <0.25% carbon. Essential raw material in Chapter 72 iron/steel wire products.
1.8mm Thick Nonalloy Steel Flat Shim Wire
Precision flat shim wire of low carbon steel (<0.25% C), 1.8mm thick x 12mm wide, for machinery alignment. HTS 7217.10.30.00 applies to this unplated flat wire exceeding 1.25mm thickness in nonalloy steel category. Used in industrial maintenance per Chapter 72.
3mm Thick Low Carbon Flat Annealed Wire
Annealed flat wire from nonalloy low carbon steel, 3mm thick x 25mm wide, for flexible binding applications. Classifies under HTS 7217.10.30.00 as not plated/coated flat wire >1.25mm thick. Annealing doesn't affect tariff classification in Chapter 72.
1.6mm x 8mm Low Carbon Profile Flat Wire
Slightly profiled flat wire (<0.25% C nonalloy steel), 1.6mm thick, for specialized fasteners. HTS 7217.10.30.00 for unplated flat wire exceeding thickness limit without qualifying as deformed rebar. Industrial use in Chapter 72 wire products.
2.2mm Thick Industrial Low Carbon Flat Wire
Heavy-duty flat wire 2.2mm thick from <0.25% carbon steel, not coated, for manufacturing clips. Precisely matches HTS 7217.10.30.00 criteria for thickness and composition in Chapter 72. Bulk import form in coils.