Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Wire of iron or nonalloy steel: > Not plated or coated, whether or not polished: > Containing by weight less than 0.25 percent of carbon: > Flat wire: > Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7217.10.20.00
Shaped Low Carbon Flat Wire 0.9 mm
Slightly shaped (non-circular) flat wire, 0.9 mm thick, <0.25% C nonalloy steel, uncoated for hoses. HTS 7217.10.20.00 as flat wire not further worked beyond basic rolling.
Precision 0.3 mm Shim Stock Flat Wire
Ultra-precise low-carbon flat wire, 0.3 mm thick x 25 mm wide, uncoated for shim stock in machinery. Falls under HTS 7217.10.20.00 for thin flat nonalloy wire specs.
HVAC Fin Stock Flat Wire 1.1 mm
Low-carbon steel flat wire 1.1 mm thick for HVAC heat exchanger fins, not coated. HTS 7217.10.20.00 classification for nonalloy flat wire in thickness range.
0.4 mm Battery Tab Flat Steel Wire
Flat low-carbon nonalloy wire, 0.4 mm x 4 mm, uncoated for lithium battery tabs. Precisely fits HTS 7217.10.20.00 parameters.
Industrial Brush Flat Wire 0.8 mm
Tempered low-carbon flat wire 0.8 mm thick for industrial cleaning brushes, uncoated. HTS 7217.10.20.00 for nonalloy flat wire specs.
1.0 mm Cable Armouring Flat Wire
Nonalloy steel flat wire 1.0 mm thick x 3 mm for power cable armouring, not coated. Classifies under HTS 7217.10.20.00.
Medical Device Spring Flat Wire 0.55 mm
Ultra-clean low-carbon flat wire 0.55 mm for medical springs, uncoated/polished only. HTS 7217.10.20.00 applies.
Packaging Strap Base Flat Wire 1.25 mm
Low-carbon flat wire 1.25 mm max thick x 10 mm for steel strapping base, uncoated. Exact match for HTS 7217.10.20.00.
0.35 mm Filter Screen Flat Wire
Fine low-carbon nonalloy flat wire 0.35 mm thick for industrial filter screens, no coatings. HTS 7217.10.20.00 classification.
AISI 1008 Low Carbon Flat Steel Wire
Flat wire made from nonalloy steel with less than 0.25% carbon content, measuring 0.8 mm thick and 10 mm wide, not plated or coated. It falls under HTS 7217.10.20.00 as it matches the exact specifications for flat wire of iron or nonalloy steel in this thickness range, suitable for manufacturing springs and clips.
0.5 mm Thick Spring Flat Wire
Uncoated flat wire of low-carbon nonalloy steel, 0.5 mm thick by 8 mm wide, used in flat springs and fasteners. Classified under HTS 7217.10.20.00 for its precise dimensions and lack of alloying elements or surface treatments.
Galvanized Staple Flat Wire 1.0 mm
No, wait—this is not plated. Correct: Plain low-carbon flat wire, 1.0 mm thick x 2 mm wide, for office staple production before galvanizing. HTS 7217.10.20.00 applies to this uncoated, nonalloy flat wire in the specified thickness.
0.75 mm Electrical Connector Flat Wire
Low-carbon nonalloy steel flat wire, 0.75 mm thick and 5 mm wide, polished but not coated, used for electrical terminal strips. Fits HTS 7217.10.20.00 as nonalloy flat wire within thickness limits, per chapter notes allowing polishing.
Automotive Clip Flat Steel Wire 0.6 mm
Flat wire of iron/nonalloy steel (<0.25% C), 0.6 mm x 12 mm, uncoated for plastic clips in vehicles. HTS 7217.10.20.00 due to flat shape, thickness, and nonalloy composition without surface treatments beyond polishing.
1.2 mm Furniture Binding Flat Wire
Nonalloy low-carbon flat steel wire, 1.2 mm thick x 3 mm wide, not coated, for upholstery binding. Matches HTS 7217.10.20.00 specifications for thickness and composition.