2.2mm Thick Industrial Low Carbon Flat Wire
Heavy-duty flat wire 2.2mm thick from <0.25% carbon steel, not coated, for manufacturing clips. Precisely matches HTS 7217.10.30.00 criteria for thickness and composition in Chapter 72. Bulk import form in coils.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If silicon-electrical steel
Special alloy compositions for electrical use classify in heading 7212.
If imported as welded mesh components
Welded/prefabricated wire structures move to Chapter 73.
If further worked beyond polishing
Additional surface treatments beyond Chapter note allowances shift subheadings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Coil weight limits apply; oversized shipments may need special handling declarations
• Confirm not high-strength steel per US note (a); yield strength testing may be required
• Markings must show HTS compliance; generic steel markings risk examination holds
Related Products under HTS 7217.10.30.00
Cold-Rolled Low Carbon Flat Steel Wire 2mm Thick
Flat wire made from nonalloy steel containing less than 0.25% carbon, with a thickness of 2mm and width of 10mm, not plated or coated. It falls under HTS 7217.10.30.00 as it meets the criteria for flat wire exceeding 1.25mm thickness in Chapter 72 for iron and nonalloy steel products. Commonly used in industrial binding and reinforcement applications.
1.5mm Thick Polished Low Carbon Flat Wire
Polished flat wire of nonalloy steel with <0.25% carbon, 1.5mm thick and 15mm wide, suitable for springs and clips. Classified under HTS 7217.10.30.00 for unplated flat wire exceeding 1.25mm thickness per Chapter 72 definitions. Polishing is permitted without changing classification.
2.5mm x 20mm Low Carbon Flat Binding Wire
Flat binding wire from low carbon nonalloy steel, 2.5mm thick, used in construction and packaging strapping. Meets HTS 7217.10.30.00 specifications for not plated/coated flat wire >1.25mm thick with <0.25% carbon. Essential raw material in Chapter 72 iron/steel wire products.
1.8mm Thick Nonalloy Steel Flat Shim Wire
Precision flat shim wire of low carbon steel (<0.25% C), 1.8mm thick x 12mm wide, for machinery alignment. HTS 7217.10.30.00 applies to this unplated flat wire exceeding 1.25mm thickness in nonalloy steel category. Used in industrial maintenance per Chapter 72.
3mm Thick Low Carbon Flat Annealed Wire
Annealed flat wire from nonalloy low carbon steel, 3mm thick x 25mm wide, for flexible binding applications. Classifies under HTS 7217.10.30.00 as not plated/coated flat wire >1.25mm thick. Annealing doesn't affect tariff classification in Chapter 72.
1.6mm x 8mm Low Carbon Profile Flat Wire
Slightly profiled flat wire (<0.25% C nonalloy steel), 1.6mm thick, for specialized fasteners. HTS 7217.10.30.00 for unplated flat wire exceeding thickness limit without qualifying as deformed rebar. Industrial use in Chapter 72 wire products.