Hot-Rolled W8x10 Wide Flange I-Beam
A standard hot-rolled I-section beam, W8x10 profile with 203 mm height and 10 lbs/ft weight, produced from nonalloy steel via hot-rolling without further processing. Classified under HTS 7216.32.00.00 for I sections over 80 mm height, not further worked. Ideal for lightweight structural applications in buildings.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If H sections rather than I sections
H sections (wider flanges) are distinguished from standard I beams and classified separately in 7216.33.
If fabricated into structures or assemblies
Finished structures or fabricated sections from these beams move to Chapter 73 headings for structures.
If cold-formed or extruded
Only hot-rolled/hot-drawn/extruded qualify here; cold-formed sections go to other 7216 subheadings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Provide certified test reports confirming nonalloy composition to prevent misclassification as tool or alloy steel per US Chapter 72 notes
ā¢ Declare exact cross-sectional dimensions and profile type (I-section) to match 7216.32 criteria and avoid undervaluation penalties
ā¢ Monitor AD/CVD orders on specific origins; bundle with proper packing lists showing uncoated, hot-rolled condition
Related Products under HTS 7216.32.00.00
Hot-Rolled S10x25.4 Standard I-Beam
A hot-rolled I-section beam with a height of 102 mm, weighing 25.4 lbs per yard, made from nonalloy steel without any further surface working beyond hot-rolling. It falls under HTS 7216.32.00.00 as an I section (standard beam) of 80 mm or more height, not further worked than hot-rolled. Commonly used in structural construction for framing and support.
Hot-Rolled S12x35 Standard Beam
Hot-rolled I-section standard beam S12x35, height 305 mm, 35 lbs/yard, nonalloy steel, not further worked. Meets HTS 7216.32.00.00 as an untreated hot-rolled I beam over 80 mm height. Used in heavy construction for columns and girders.
Hot-Rolled S18x54.7 Heavy I-Beam
Heavy-duty S18x54.7 standard I-beam, hot-rolled nonalloy steel, 457 mm height, 54.7 lbs/yd, untreated. Under HTS 7216.32.00.00 as hot-rolled I section over 80 mm. For industrial building supports.
Hot-Rolled W10x22 Standard Beam
W10x22 wide flange I-beam, 254 mm height, hot-rolled nonalloy steel, 22 lbs/ft, no further work. HTS 7216.32.00.00 applies to this standard beam profile over 80 mm. Used in residential framing.
Hot-Rolled S24x80 Deep I-Beam
Deep S24x80 I-section beam, 610 mm height, 80 lbs/yd hot-rolled nonalloy steel, untreated. Classifies in HTS 7216.32.00.00 for large standard I beams. For crane runway supports.
Hot-Rolled W12x26 Wide Flange Beam
W12x26 I-section beam, hot-rolled from nonalloy steel, 310 mm height, 26 lbs/ft, no further working. Fits HTS 7216.32.00.00 for standard I beams ā„80 mm hot-rolled. Structural grade for bridges and frames.