Hot-Rolled S24x80 Deep I-Beam
Deep S24x80 I-section beam, 610 mm height, 80 lbs/yd hot-rolled nonalloy steel, untreated. Classifies in HTS 7216.32.00.00 for large standard I beams. For crane runway supports.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sold as concrete reinforcing
Deformations for concrete per US note (c) reclassify to 7214 reinforcing bars.
If made into bridge sections
Prefabricated bridge components shift to Chapter 73.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Use protective end caps to prevent damage claims; document condition at entry
ā¢ Verify extrusion vs hot-rolled process in certs, both allowed but declare accurately
ā¢ Avoid mixing with alloy beams in same container to prevent co-mingling issues
Related Products under HTS 7216.32.00.00
Hot-Rolled S10x25.4 Standard I-Beam
A hot-rolled I-section beam with a height of 102 mm, weighing 25.4 lbs per yard, made from nonalloy steel without any further surface working beyond hot-rolling. It falls under HTS 7216.32.00.00 as an I section (standard beam) of 80 mm or more height, not further worked than hot-rolled. Commonly used in structural construction for framing and support.
Hot-Rolled W8x10 Wide Flange I-Beam
A standard hot-rolled I-section beam, W8x10 profile with 203 mm height and 10 lbs/ft weight, produced from nonalloy steel via hot-rolling without further processing. Classified under HTS 7216.32.00.00 for I sections over 80 mm height, not further worked. Ideal for lightweight structural applications in buildings.
Hot-Rolled S12x35 Standard Beam
Hot-rolled I-section standard beam S12x35, height 305 mm, 35 lbs/yard, nonalloy steel, not further worked. Meets HTS 7216.32.00.00 as an untreated hot-rolled I beam over 80 mm height. Used in heavy construction for columns and girders.
Hot-Rolled S18x54.7 Heavy I-Beam
Heavy-duty S18x54.7 standard I-beam, hot-rolled nonalloy steel, 457 mm height, 54.7 lbs/yd, untreated. Under HTS 7216.32.00.00 as hot-rolled I section over 80 mm. For industrial building supports.
Hot-Rolled W10x22 Standard Beam
W10x22 wide flange I-beam, 254 mm height, hot-rolled nonalloy steel, 22 lbs/ft, no further work. HTS 7216.32.00.00 applies to this standard beam profile over 80 mm. Used in residential framing.
Hot-Rolled W12x26 Wide Flange Beam
W12x26 I-section beam, hot-rolled from nonalloy steel, 310 mm height, 26 lbs/ft, no further working. Fits HTS 7216.32.00.00 for standard I beams ā„80 mm hot-rolled. Structural grade for bridges and frames.