Hot-Rolled S10x25.4 Standard I-Beam
A hot-rolled I-section beam with a height of 102 mm, weighing 25.4 lbs per yard, made from nonalloy steel without any further surface working beyond hot-rolling. It falls under HTS 7216.32.00.00 as an I section (standard beam) of 80 mm or more height, not further worked than hot-rolled. Commonly used in structural construction for framing and support.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If polished, coated, or otherwise further worked
Surface treatments like polishing or coating change classification from 'not further worked' to 'further worked' under 7216.91 per Chapter 72 definitions.
If height less than 80 mm
I sections under 80 mm height fall under other bars/sections in 7214, not qualifying for the 7216 height threshold.
If made of alloy steel
Alloy steel versions (with specified alloy elements per US notes) shift to Chapter 72 alloy headings like 7228.70.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Verify steel composition meets nonalloy steel criteria (less than 0.3% carbon, no significant alloying elements) via mill certificates to avoid reclassification
ā¢ Ensure accurate dimensional reporting (height ā„80mm, I-section profile) and weight per unit length for customs valuation and quota applicability
ā¢ Check Section 232 tariffs and steel import licenses; rust prior to entry does not qualify for duty reduction per Chapter 72 notes
Related Products under HTS 7216.32.00.00
Hot-Rolled W8x10 Wide Flange I-Beam
A standard hot-rolled I-section beam, W8x10 profile with 203 mm height and 10 lbs/ft weight, produced from nonalloy steel via hot-rolling without further processing. Classified under HTS 7216.32.00.00 for I sections over 80 mm height, not further worked. Ideal for lightweight structural applications in buildings.
Hot-Rolled S12x35 Standard Beam
Hot-rolled I-section standard beam S12x35, height 305 mm, 35 lbs/yard, nonalloy steel, not further worked. Meets HTS 7216.32.00.00 as an untreated hot-rolled I beam over 80 mm height. Used in heavy construction for columns and girders.
Hot-Rolled S18x54.7 Heavy I-Beam
Heavy-duty S18x54.7 standard I-beam, hot-rolled nonalloy steel, 457 mm height, 54.7 lbs/yd, untreated. Under HTS 7216.32.00.00 as hot-rolled I section over 80 mm. For industrial building supports.
Hot-Rolled W10x22 Standard Beam
W10x22 wide flange I-beam, 254 mm height, hot-rolled nonalloy steel, 22 lbs/ft, no further work. HTS 7216.32.00.00 applies to this standard beam profile over 80 mm. Used in residential framing.
Hot-Rolled S24x80 Deep I-Beam
Deep S24x80 I-section beam, 610 mm height, 80 lbs/yd hot-rolled nonalloy steel, untreated. Classifies in HTS 7216.32.00.00 for large standard I beams. For crane runway supports.
Hot-Rolled W12x26 Wide Flange Beam
W12x26 I-section beam, hot-rolled from nonalloy steel, 310 mm height, 26 lbs/ft, no further working. Fits HTS 7216.32.00.00 for standard I beams ā„80 mm hot-rolled. Structural grade for bridges and frames.