Pickled Nonalloy Steel for HVAC Duct Flanges 2.2mm x 300mm
Hot-rolled pickled steel coil/sheet for fabricating HVAC duct connection flanges, 300mm width. Classifies HTS 7211.19.60.00 as flat-rolled iron/nonalloy steel <600mm, pickled not further worked.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pre-welded duct fittings
Fabricated pipe/tube fittings from steel classify under heading 7307.
If U/I/O sections
Corrugated/profiles for ducting may qualify as U/I/O sections under 7216.
If varnished/painted
Surface treatments like painting post-pickling = further worked per Chapter Note.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Ensure gauge tolerance for HVAC specs; declare as semi-finished not fabricated parts; watch import quotas if applicable to steel
Related Products under HTS 7211.19.60.00
Pickled Hot-Rolled Steel Strip 0.5mm x 50mm
Narrow hot-rolled steel strip of nonalloy steel, pickled to remove mill scale, with width under 600mm and thickness 0.5mm. Classified under HTS 7211.19.60.00 as flat-rolled product of iron/nonalloy steel, hot-rolled but pickled, not further worked, not clad/plated/coated. The pickling process qualifies it specifically under the 'pickled' subheading.
Pickled Nonalloy Steel Sheet 1.2mm x 450mm
Hot-rolled sheet of nonalloy steel, acid-pickled for scale removal, width 450mm <600mm, not clad or coated. Fits HTS 7211.19.60.00 as 'other' flat-rolled iron/nonalloy steel products, hot-rolled then pickled, without further working like polishing or coating.
Narrow Pickled Steel Banding 0.8mm x 30mm
Hot-rolled nonalloy steel used for strapping/banding, pickled surface, width 30mm, thickness 0.8mm. HTS 7211.19.60.00 covers this as flat-rolled product <600mm width, hot-rolled and pickled, not further worked or coated.
Pickled HRPO Steel Strip 2.0mm x 200mm
Hot-rolled pickled and oiled (HRPO) steel strip, but oiled lightly post-pickling without qualifying as coated; width 200mm. Classifies in 7211.19.60.00 as pickled hot-rolled nonalloy steel flat product <600mm, where minimal oil residue doesn't constitute 'coating'.
Pickled Low Carbon Steel Shim Stock 0.3mm x 100mm
Thin hot-rolled low-carbon nonalloy steel sheet for shims/spacers, acid-pickled, width 100mm. HTS 7211.19.60.00 applies to such narrow flat-rolled products of iron/nonalloy steel that are hot-rolled and pickled without cladding, plating, or further working.
Pickled Mild Steel Flat Bar 3mm x 50mm
Hot-rolled mild steel rectangular section, considered flat-rolled due to width/thickness ratio >4:1, pickled surface, 50mm width. Fits 7211.19.60.00 as nonalloy steel flat-rolled product <600mm, hot-rolled pickled, other than specified exclusions.