Pickled
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated: > Not further worked than hot-rolled: > Other: > Other: > Other: > Pickled
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7211.19.60.00
Pickled Hot-Rolled Steel Strip 0.5mm x 50mm
Narrow hot-rolled steel strip of nonalloy steel, pickled to remove mill scale, with width under 600mm and thickness 0.5mm. Classified under HTS 7211.19.60.00 as flat-rolled product of iron/nonalloy steel, hot-rolled but pickled, not further worked, not clad/plated/coated. The pickling process qualifies it specifically under the 'pickled' subheading.
Pickled Nonalloy Steel Sheet 1.2mm x 450mm
Hot-rolled sheet of nonalloy steel, acid-pickled for scale removal, width 450mm <600mm, not clad or coated. Fits HTS 7211.19.60.00 as 'other' flat-rolled iron/nonalloy steel products, hot-rolled then pickled, without further working like polishing or coating.
Narrow Pickled Steel Banding 0.8mm x 30mm
Hot-rolled nonalloy steel used for strapping/banding, pickled surface, width 30mm, thickness 0.8mm. HTS 7211.19.60.00 covers this as flat-rolled product <600mm width, hot-rolled and pickled, not further worked or coated.
Pickled HRPO Steel Strip 2.0mm x 200mm
Hot-rolled pickled and oiled (HRPO) steel strip, but oiled lightly post-pickling without qualifying as coated; width 200mm. Classifies in 7211.19.60.00 as pickled hot-rolled nonalloy steel flat product <600mm, where minimal oil residue doesn't constitute 'coating'.
Pickled Low Carbon Steel Shim Stock 0.3mm x 100mm
Thin hot-rolled low-carbon nonalloy steel sheet for shims/spacers, acid-pickled, width 100mm. HTS 7211.19.60.00 applies to such narrow flat-rolled products of iron/nonalloy steel that are hot-rolled and pickled without cladding, plating, or further working.
Pickled Mild Steel Flat Bar 3mm x 50mm
Hot-rolled mild steel rectangular section, considered flat-rolled due to width/thickness ratio >4:1, pickled surface, 50mm width. Fits 7211.19.60.00 as nonalloy steel flat-rolled product <600mm, hot-rolled pickled, other than specified exclusions.
Pickled Steel for Razor Blade Manufacturing 0.15mm x 20mm
Narrow hot-rolled nonalloy steel strip, pickled, certified for razor blade production, width 20mm. Classifies under HTS 7211.19.60.00 as general pickled flat-rolled nonalloy steel <600mm; doesn't meet razor blade steel Note 72(d) specs.
Pickled Hot-Rolled Spring Steel Strip 1.5mm x 150mm
Nonalloy steel strip for springs, hot-rolled and pickled, width 150mm <600mm. HTS 7211.19.60.00 for flat-rolled iron/nonalloy steel, not further worked than hot-rolled/pickled, distinguishing from alloy spring steels.
Pickled Nonalloy Steel Checkering Plate 4mm x 500mm
Hot-rolled steel plate with checkered pattern, pickled to clean surface, width 500mm. While patterned, pickling without relief patterns per notes keeps it in HTS 7211.19.60.00 as other pickled flat-rolled <600mm.
Narrow Pickled Steel for Tool Blanks 2.5mm x 75mm
Hot-rolled nonalloy steel strip for cutting into tool blanks, surface pickled, 75mm width. HTS 7211.19.60.00 covers this semi-finished flat-rolled product of iron/nonalloy steel, hot-rolled and pickled only.
Pickled Hot-Rolled Steel for Automotive Stampings 1.8mm x 400mm
Nonalloy steel sheet, hot-rolled pickled for automotive body panel stampings, width 400mm. Perfectly matches HTS 7211.19.60.00: flat-rolled <600mm, not further than hot-rolled/pickled, no cladding.
Pickled Steel Edging Strip 1.0mm x 25mm
Very narrow hot-rolled steel strip for edging/trim applications, pickled surface treatment, 25mm width. HTS 7211.19.60.00 for such 'other' flat-rolled nonalloy steel products <600mm hot-rolled pickled.
Pickled Nonalloy Steel for HVAC Duct Flanges 2.2mm x 300mm
Hot-rolled pickled steel coil/sheet for fabricating HVAC duct connection flanges, 300mm width. Classifies HTS 7211.19.60.00 as flat-rolled iron/nonalloy steel <600mm, pickled not further worked.
Thin Pickled Steel for Battery Casings 0.4mm x 120mm
Ultra-thin hot-rolled nonalloy steel strip, pickled, for deep-drawn battery containers, 120mm width. HTS 7211.19.60.00 precisely for thin flat-rolled products <600mm that are hot-rolled then pickled.
Pickled Steel Washer Blank Stock 1.6mm x 80mm
Hot-rolled nonalloy steel sheet, pickled for progressive die washer production, 80mm width. Standard HTS 7211.19.60.00 classification for such narrow pickled hot-rolled flat products used in fastener manufacturing.