Pickled Nonalloy Steel Sheet 1.2mm x 450mm
Hot-rolled sheet of nonalloy steel, acid-pickled for scale removal, width 450mm <600mm, not clad or coated. Fits HTS 7211.19.60.00 as 'other' flat-rolled iron/nonalloy steel products, hot-rolled then pickled, without further working like polishing or coating.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If universal mill plate specs
If meets US Note 72(b) definition (width 150-1250mm, thickness >=4mm, four-face rolled, no coils/patterns), classifies as universal mill plate.
If in coils
Hot-rolled products in coils, even pickled, fall under 7208; straightened/dec coiled moves to 7211.
If further worked with plating
Any plating/coating after pickling constitutes 'further worked' per Chapter Note, shifting to heading 7217.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificates confirming nonalloy composition and hot-rolled origin; declare exact pickling method to avoid reclassification; inspect for rust/discoloration—no duty allowance per Chapter Note
Related Products under HTS 7211.19.60.00
Pickled Hot-Rolled Steel Strip 0.5mm x 50mm
Narrow hot-rolled steel strip of nonalloy steel, pickled to remove mill scale, with width under 600mm and thickness 0.5mm. Classified under HTS 7211.19.60.00 as flat-rolled product of iron/nonalloy steel, hot-rolled but pickled, not further worked, not clad/plated/coated. The pickling process qualifies it specifically under the 'pickled' subheading.
Narrow Pickled Steel Banding 0.8mm x 30mm
Hot-rolled nonalloy steel used for strapping/banding, pickled surface, width 30mm, thickness 0.8mm. HTS 7211.19.60.00 covers this as flat-rolled product <600mm width, hot-rolled and pickled, not further worked or coated.
Pickled HRPO Steel Strip 2.0mm x 200mm
Hot-rolled pickled and oiled (HRPO) steel strip, but oiled lightly post-pickling without qualifying as coated; width 200mm. Classifies in 7211.19.60.00 as pickled hot-rolled nonalloy steel flat product <600mm, where minimal oil residue doesn't constitute 'coating'.
Pickled Low Carbon Steel Shim Stock 0.3mm x 100mm
Thin hot-rolled low-carbon nonalloy steel sheet for shims/spacers, acid-pickled, width 100mm. HTS 7211.19.60.00 applies to such narrow flat-rolled products of iron/nonalloy steel that are hot-rolled and pickled without cladding, plating, or further working.
Pickled Mild Steel Flat Bar 3mm x 50mm
Hot-rolled mild steel rectangular section, considered flat-rolled due to width/thickness ratio >4:1, pickled surface, 50mm width. Fits 7211.19.60.00 as nonalloy steel flat-rolled product <600mm, hot-rolled pickled, other than specified exclusions.
Pickled Steel for Razor Blade Manufacturing 0.15mm x 20mm
Narrow hot-rolled nonalloy steel strip, pickled, certified for razor blade production, width 20mm. Classifies under HTS 7211.19.60.00 as general pickled flat-rolled nonalloy steel <600mm; doesn't meet razor blade steel Note 72(d) specs.