Hot-Rolled Mild Steel Strip for Automotive Trim
Narrow hot-rolled flat strip of nonalloy steel, less than 300 mm wide and over 1.25 mm thick, used for manufacturing decorative trim in vehicles. Classified under HTS 7211.19.2000 as a flat-rolled product of iron or nonalloy steel, not further worked than hot-rolled, with width under 300 mm and thickness exceeding 1.25 mm. Lacks alloying elements exceeding nonalloy steel limits and no cladding, plating, or coating.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If width of 300 mm or more but less than 600 mm
Same hot-rolled nonalloy steel but exceeds 300 mm width threshold, shifting to next subheading.
If in coils rather than cut lengths
Coiled hot-rolled products fall under heading 7208 before 7211 for widths under 600 mm.
If pickled or oiled surface treatment applied
Surface treatments beyond basic hot-rolling constitute 'further worked' per Chapter notes, moving to 7210.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify chemical composition certificate confirms nonalloy steel (carbon ≤0.6%, no significant alloys per Chapter 72 notes)
• Measure exact width (<300 mm) and thickness (>1.25 mm) at thickest point; provide mill test report for CBP inspection
Related Products under HTS 7211.19.20.00
Machinery Guard Hot-Rolled Steel Panel
Hot-rolled nonalloy steel sheet 280 mm wide by 4 mm thick for safety guards on industrial equipment. HTS 7211.19.2000: <300 mm width distinguishes from wider plates, thickness >1.25 mm, no further working/coatings.
Hot-Rolled Steel Track Base for Slides
Narrow hot-rolled mild steel strip 40 mm wide by 2 mm thick forming base channel for drawer slides and rails. Fits 7211.19.2000 precisely: nonalloy steel flat-rolled, <300 mm (much narrower), >1.25 mm thick, basic hot-rolled surface.
Hot-Rolled Carbon Steel Banding Strap
Heavy-duty hot-rolled nonalloy steel strip, 25-50 mm wide and 2-4 mm thick, used for securing cargo pallets and heavy machinery. Fits HTS 7211.19.2000 due to narrow width under 300 mm, thickness over 1.25 mm, hot-rolled finish without cladding, plating, or coating. Meets nonalloy steel definition from Chapter 72 notes.
Narrow Hot-Rolled Steel Shim Stock
Precision hot-rolled low-carbon steel strip, 100 mm wide by 1.5 mm thick, supplied in sheets for machinery shimming and leveling. Classifies in 7211.19.2000 as hot-rolled nonalloy flat-rolled product <300 mm wide, >1.25 mm thick, without cladding, plating, coating, or other further working.
Hot-Rolled Nonalloy Steel Edging Strip
Hot-rolled mild steel strip 200 mm wide by 2.5 mm thick for furniture and shelf edging applications. HTS 7211.19.2000: flat-rolled iron/nonalloy steel, <600 mm wide (<300 mm here), hot-rolled only, thickness >1.25 mm, no surface treatments.
Industrial Hot-Rolled Steel Mounting Plate Blanks
Hot-rolled carbon steel rectangular blanks, 250 mm wide by 6 mm thick, for machinery mounting bases. Perfectly matches 7211.19.2000: nonalloy steel, width <300 mm, thickness well over 1.25 mm, basic hot-rolled mill finish without further processing.