Machinery Guard Hot-Rolled Steel Panel
Hot-rolled nonalloy steel sheet 280 mm wide by 4 mm thick for safety guards on industrial equipment. HTS 7211.19.2000: <300 mm width distinguishes from wider plates, thickness >1.25 mm, no further working/coatings.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If enameled or lacquered
Nonmetallic coatings constitute further working per Chapter 72 note.
If fabricated into guard assembly
Finished metal structures/parts move to Chapter 73.
If not fully annealed (indented surface)
Specific surface deformation during rolling classifies differently.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Industrial use documentation prevents consumer article classification
• Confirm not universal mill plate (no closed box pass/patterns)
• Gauge consistency across shipment; mixed thicknesses require separate entries
Related Products under HTS 7211.19.20.00
Hot-Rolled Steel Track Base for Slides
Narrow hot-rolled mild steel strip 40 mm wide by 2 mm thick forming base channel for drawer slides and rails. Fits 7211.19.2000 precisely: nonalloy steel flat-rolled, <300 mm (much narrower), >1.25 mm thick, basic hot-rolled surface.
Hot-Rolled Carbon Steel Banding Strap
Heavy-duty hot-rolled nonalloy steel strip, 25-50 mm wide and 2-4 mm thick, used for securing cargo pallets and heavy machinery. Fits HTS 7211.19.2000 due to narrow width under 300 mm, thickness over 1.25 mm, hot-rolled finish without cladding, plating, or coating. Meets nonalloy steel definition from Chapter 72 notes.
Narrow Hot-Rolled Steel Shim Stock
Precision hot-rolled low-carbon steel strip, 100 mm wide by 1.5 mm thick, supplied in sheets for machinery shimming and leveling. Classifies in 7211.19.2000 as hot-rolled nonalloy flat-rolled product <300 mm wide, >1.25 mm thick, without cladding, plating, coating, or other further working.
Hot-Rolled Nonalloy Steel Edging Strip
Hot-rolled mild steel strip 200 mm wide by 2.5 mm thick for furniture and shelf edging applications. HTS 7211.19.2000: flat-rolled iron/nonalloy steel, <600 mm wide (<300 mm here), hot-rolled only, thickness >1.25 mm, no surface treatments.
Industrial Hot-Rolled Steel Mounting Plate Blanks
Hot-rolled carbon steel rectangular blanks, 250 mm wide by 6 mm thick, for machinery mounting bases. Perfectly matches 7211.19.2000: nonalloy steel, width <300 mm, thickness well over 1.25 mm, basic hot-rolled mill finish without further processing.
Hot-Rolled Mild Steel Weatherstripping Base
Hot-rolled low-carbon steel strip 150 mm wide by 1.8 mm thick serving as carrier for rubber weatherstripping in doors/windows. Classifies 7211.19.2000: nonalloy flat-rolled product, narrow width <300 mm, thickness >1.25 mm, mill finish only.