Industrial Hot-Rolled Steel Mounting Plate Blanks
Hot-rolled carbon steel rectangular blanks, 250 mm wide by 6 mm thick, for machinery mounting bases. Perfectly matches 7211.19.2000: nonalloy steel, width <300 mm, thickness well over 1.25 mm, basic hot-rolled mill finish without further processing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If burnished or polished surface
'Further worked' note includes polishing, shifting from basic hot-rolled category.
If supplied as punched/formed concrete rebar
Concrete reinforcing bars/rods with deformations classify separately per note (c).
If heat-resisting alloy composition
Low C + high Cr (4-10.5%) meets heat-resisting steel note, alloy heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Mill certs must specify rolling process (hot vs. cold) and exact gauge/thickness
• Heavy gauge common; verify no universal mill plate criteria (width/pattern limits)
• Rust protection via dry storage only—coatings void hot-rolled status
Related Products under HTS 7211.19.20.00
Machinery Guard Hot-Rolled Steel Panel
Hot-rolled nonalloy steel sheet 280 mm wide by 4 mm thick for safety guards on industrial equipment. HTS 7211.19.2000: <300 mm width distinguishes from wider plates, thickness >1.25 mm, no further working/coatings.
Hot-Rolled Steel Track Base for Slides
Narrow hot-rolled mild steel strip 40 mm wide by 2 mm thick forming base channel for drawer slides and rails. Fits 7211.19.2000 precisely: nonalloy steel flat-rolled, <300 mm (much narrower), >1.25 mm thick, basic hot-rolled surface.
Hot-Rolled Carbon Steel Banding Strap
Heavy-duty hot-rolled nonalloy steel strip, 25-50 mm wide and 2-4 mm thick, used for securing cargo pallets and heavy machinery. Fits HTS 7211.19.2000 due to narrow width under 300 mm, thickness over 1.25 mm, hot-rolled finish without cladding, plating, or coating. Meets nonalloy steel definition from Chapter 72 notes.
Narrow Hot-Rolled Steel Shim Stock
Precision hot-rolled low-carbon steel strip, 100 mm wide by 1.5 mm thick, supplied in sheets for machinery shimming and leveling. Classifies in 7211.19.2000 as hot-rolled nonalloy flat-rolled product <300 mm wide, >1.25 mm thick, without cladding, plating, coating, or other further working.
Hot-Rolled Nonalloy Steel Edging Strip
Hot-rolled mild steel strip 200 mm wide by 2.5 mm thick for furniture and shelf edging applications. HTS 7211.19.2000: flat-rolled iron/nonalloy steel, <600 mm wide (<300 mm here), hot-rolled only, thickness >1.25 mm, no surface treatments.
Hot-Rolled Mild Steel Weatherstripping Base
Hot-rolled low-carbon steel strip 150 mm wide by 1.8 mm thick serving as carrier for rubber weatherstripping in doors/windows. Classifies 7211.19.2000: nonalloy flat-rolled product, narrow width <300 mm, thickness >1.25 mm, mill finish only.