SPF Spruce Plywood Construction Panel
Plywood panel from Spruce-Pine-Fir (S-P-F) mixed coniferous woods, all plies ≤6mm thick, outer plies spruce, unsurfaced or with clear coat only. Ideal for framing and subflooring. Under 4412.39.4069 for other coniferous plywood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If both outer plies are tropical wood species
Tropical outer plies place it in 4412.13; coniferous like SPF stays in 4412.39.
If made from particleboard core instead of wood plies
Particleboard-based panels fall under 4410; true plywood requires wood sheet plies.
If containing >50% stone or aggregate material
Engineered panels with non-wood matrix shift to Chapter 68 stone/glass fiber products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document S-P-F species mix per subheading note; provide harvest origin for traceability
• Ensure panels meet CARB Phase 2 formaldehyde emission standards with EPA TSCA certification for US entry
• Measure outer ply thickness precisely; exceeding specs risks reclassification during customs exam
Related Products under HTS 4412.39.40.69
40mm Baltic Birch Plywood Panel
Baltic birch plywood made from multiple thin sheets of birch wood, a coniferous species, each ply not exceeding 6mm thick, with both outer plies of birch veneer. Not surface-covered or covered only with transparent material that shows the wood grain. Classified under 4412.39.4069 as other plywood with coniferous outer plies, not surface-covered.
Radiata Pine Laminated Plywood Sheet
Laminated plywood sheet constructed from Radiata pine veneers, each ply ≤6mm, featuring coniferous outer plies and no opaque surface covering. Used for construction formwork and shelving. Fits 4412.39.4069 as other non-surface-covered coniferous plywood.
Douglas Fir Veneer Core Plywood
Multi-ply plywood with Douglas fir coniferous outer veneers, each sheet ≤6mm, core of softer pine, no grain-obscuring surface treatment. Used in cabinetry backs and furniture. Classed 4412.39.4069 as other qualifying plywood.
Lodgepole Pine Structural Plywood
Engineered plywood from lodgepole pine thin sheets, coniferous outer plies, each ≤6mm, transparent protective coating only. Meets building code for sheathing. HTS 4412.39.4069 for unsurfaced coniferous types.
Western Hemlock Mixed Plywood
Plywood panels blending western hemlock and fir (Hem-fir per note), coniferous outer veneers ≤6mm per ply, clear finish. For interior millwork. Fits precisely under 4412.39.4069 other category.