Lodgepole Pine Structural Plywood
Engineered plywood from lodgepole pine thin sheets, coniferous outer plies, each ≤6mm, transparent protective coating only. Meets building code for sheathing. HTS 4412.39.4069 for unsurfaced coniferous types.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If blockboard construction with solid wood core blocks
Blockboard with glued wood blocks >6mm core differs from sheet ply plywood.
If pre-cut to door dimensions
Doors and frames classify as finished joinery under 4418.20.
If for S-P-F sourced untreated lumber before processing
Raw coniferous sawn wood in 4407; plywood fabrication shifts to 4412.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include structural rating stamps (e.g
• APA certified) but note they don't affect HTS classification
• Monitor formaldehyde content; non-compliant panels face TSCA detention at entry
• Separate from OSB shipments as different chapters apply to strand-based panels
Related Products under HTS 4412.39.40.69
40mm Baltic Birch Plywood Panel
Baltic birch plywood made from multiple thin sheets of birch wood, a coniferous species, each ply not exceeding 6mm thick, with both outer plies of birch veneer. Not surface-covered or covered only with transparent material that shows the wood grain. Classified under 4412.39.4069 as other plywood with coniferous outer plies, not surface-covered.
Radiata Pine Laminated Plywood Sheet
Laminated plywood sheet constructed from Radiata pine veneers, each ply ≤6mm, featuring coniferous outer plies and no opaque surface covering. Used for construction formwork and shelving. Fits 4412.39.4069 as other non-surface-covered coniferous plywood.
SPF Spruce Plywood Construction Panel
Plywood panel from Spruce-Pine-Fir (S-P-F) mixed coniferous woods, all plies ≤6mm thick, outer plies spruce, unsurfaced or with clear coat only. Ideal for framing and subflooring. Under 4412.39.4069 for other coniferous plywood.
Douglas Fir Veneer Core Plywood
Multi-ply plywood with Douglas fir coniferous outer veneers, each sheet ≤6mm, core of softer pine, no grain-obscuring surface treatment. Used in cabinetry backs and furniture. Classed 4412.39.4069 as other qualifying plywood.
Western Hemlock Mixed Plywood
Plywood panels blending western hemlock and fir (Hem-fir per note), coniferous outer veneers ≤6mm per ply, clear finish. For interior millwork. Fits precisely under 4412.39.4069 other category.