Radiata Pine Laminated Plywood Sheet
Laminated plywood sheet constructed from Radiata pine veneers, each ply ≤6mm, featuring coniferous outer plies and no opaque surface covering. Used for construction formwork and shelving. Fits 4412.39.4069 as other non-surface-covered coniferous plywood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If imported as sawn Hem-fir boards before lamination
Unlaminated coniferous sawn wood falls under 4407; lamination into plywood moves it to 4412.
If surface-covered with decorative paper or foil
Surface-covered plywood shifts to 4412.39.60xx subheading based on covering material.
If shaped into builders' joinery like door panels
Pre-fabricated joinery products are classified under 4418 by function rather than material form.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include mill test certificate specifying ply count, thickness, and species (Pinus radiata as coniferous)
• Check for CITES restrictions if any species approach protected status; label moisture content <20% to prevent mold claims
• Do not apply decorative laminates pre-import as this changes classification to surface-covered plywood
Related Products under HTS 4412.39.40.69
40mm Baltic Birch Plywood Panel
Baltic birch plywood made from multiple thin sheets of birch wood, a coniferous species, each ply not exceeding 6mm thick, with both outer plies of birch veneer. Not surface-covered or covered only with transparent material that shows the wood grain. Classified under 4412.39.4069 as other plywood with coniferous outer plies, not surface-covered.
SPF Spruce Plywood Construction Panel
Plywood panel from Spruce-Pine-Fir (S-P-F) mixed coniferous woods, all plies ≤6mm thick, outer plies spruce, unsurfaced or with clear coat only. Ideal for framing and subflooring. Under 4412.39.4069 for other coniferous plywood.
Douglas Fir Veneer Core Plywood
Multi-ply plywood with Douglas fir coniferous outer veneers, each sheet ≤6mm, core of softer pine, no grain-obscuring surface treatment. Used in cabinetry backs and furniture. Classed 4412.39.4069 as other qualifying plywood.
Lodgepole Pine Structural Plywood
Engineered plywood from lodgepole pine thin sheets, coniferous outer plies, each ≤6mm, transparent protective coating only. Meets building code for sheathing. HTS 4412.39.4069 for unsurfaced coniferous types.
Western Hemlock Mixed Plywood
Plywood panels blending western hemlock and fir (Hem-fir per note), coniferous outer veneers ≤6mm per ply, clear finish. For interior millwork. Fits precisely under 4412.39.4069 other category.