Mahogany Face Veneer Plywood Panel
Plywood panel consisting solely of wood sheets, each ply not exceeding 6mm thick, featuring a face ply of genuine mahogany (Swietenia spp.) with inner plies of mixed tropical hardwoods. Not surface-covered or covered only with transparent material preserving the mahogany grain and texture. Classified under 4412.34.32.55 due to the specified mahogany face ply on nonconiferous plywood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If face ply is dark red meranti, white lauan, or similar specified tropical wood
Subheading 4412.33 covers plywood with outer plies of those specific nonconiferous species listed separately from general mahogany.
If any ply exceeds 6mm thickness
Plywood with thicker plies shifts to 4412.94 as it no longer qualifies as consisting solely of sheets ≤6mm thick.
If supplied as veneer sheets rather than assembled plywood
Unworked or worked veneer sheets of nonconiferous wood like mahogany classify under 4408 before lamination into plywood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide CITES documentation for Swietenia mahogany species to avoid customs delays and ensure compliance with endangered species regulations
• Document exact ply thickness (≤6mm each) and confirm no opaque surface covering to maintain 4412.34 classification
• Include mill certificates verifying mahogany face ply origin and species (Swietenia or Khaya) to prevent reclassification
Related Products under HTS 4412.34.32.55
Khaya Mahogany Plywood Sheet
Standard 4x8 ft plywood sheet with Khaya spp. (African mahogany) as the exposed face ply, backed by poplar core plies all ≤6mm thick. Grain and texture visible through clear UV protective coating. Falls under HTS 4412.34.32.55 for plywood with Khaya mahogany face ply, not surface-covered obscuring the wood.
Swietenia Mahogany Cabinet Grade Plywood
High-quality 3/4-inch cabinet-grade plywood with genuine Swietenia macrophylla mahogany face veneer ply (≤6mm), crossbanded with lauan and eucalyptus core. Clear lacquer finish reveals natural mahogany figuring. HTS 4412.34.32.55 applies specifically to plywood featuring this restricted mahogany species on the face.
Mahogany Face Baltic Birch Plywood
Baltic birch core plywood (Betula spp.) topped with Khaya mahogany face veneer ply, all plies ≤6mm, finished with clear conversion varnish. Used for fine furniture and millwork. Classified 4412.34.32.55 for the mahogany face on otherwise nonconiferous plywood construction.
Aircraft Grade Mahogany Plywood
Lightweight plywood for aircraft interior panels with Swietenia mahogany face ply over okoume core, all plies ≤6mm per FAA specifications. Transparent epoxy finish preserves wood markings. HTS 4412.34.32.55 due to mahogany face ply despite specialized end use.
Furniture Grade Khaya Plywood
12mm furniture plywood with Khaya ivorensis mahogany face and back over 5-layer hardwood core, all ≤6mm plies. Clear pre-catalyzed lacquer finish. 4412.34.32.55 classification for Khaya face ply on nonconiferous plywood.