Khaya Mahogany Plywood Sheet
Standard 4x8 ft plywood sheet with Khaya spp. (African mahogany) as the exposed face ply, backed by poplar core plies all ≤6mm thick. Grain and texture visible through clear UV protective coating. Falls under HTS 4412.34.32.55 for plywood with Khaya mahogany face ply, not surface-covered obscuring the wood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If at least one outer ply is birch or poplar
Plywood with birch/poplar outer plies classifies under 4412.31 regardless of inner ply species.
If face ply is other nonconiferous wood but surface-covered with opaque laminate
Opaque surface coverings move plywood to 4412.39 even with nonconiferous outer plies.
If assembled into finished builders' joinery like doors or panels
Fabricated into joinery products shifts classification from basic plywood to 4418 heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• African Khaya mahogany typically doesn't require CITES but verify species certificates to distinguish from restricted Swietenia
• Measure and document all individual ply thicknesses to confirm ≤6mm compliance for this subheading
• Avoid phenolic resins or opaque paints on face ply to prevent movement to surface-covered plywood categories
Related Products under HTS 4412.34.32.55
Mahogany Face Veneer Plywood Panel
Plywood panel consisting solely of wood sheets, each ply not exceeding 6mm thick, featuring a face ply of genuine mahogany (Swietenia spp.) with inner plies of mixed tropical hardwoods. Not surface-covered or covered only with transparent material preserving the mahogany grain and texture. Classified under 4412.34.32.55 due to the specified mahogany face ply on nonconiferous plywood.
Swietenia Mahogany Cabinet Grade Plywood
High-quality 3/4-inch cabinet-grade plywood with genuine Swietenia macrophylla mahogany face veneer ply (≤6mm), crossbanded with lauan and eucalyptus core. Clear lacquer finish reveals natural mahogany figuring. HTS 4412.34.32.55 applies specifically to plywood featuring this restricted mahogany species on the face.
Mahogany Face Baltic Birch Plywood
Baltic birch core plywood (Betula spp.) topped with Khaya mahogany face veneer ply, all plies ≤6mm, finished with clear conversion varnish. Used for fine furniture and millwork. Classified 4412.34.32.55 for the mahogany face on otherwise nonconiferous plywood construction.
Aircraft Grade Mahogany Plywood
Lightweight plywood for aircraft interior panels with Swietenia mahogany face ply over okoume core, all plies ≤6mm per FAA specifications. Transparent epoxy finish preserves wood markings. HTS 4412.34.32.55 due to mahogany face ply despite specialized end use.
Furniture Grade Khaya Plywood
12mm furniture plywood with Khaya ivorensis mahogany face and back over 5-layer hardwood core, all ≤6mm plies. Clear pre-catalyzed lacquer finish. 4412.34.32.55 classification for Khaya face ply on nonconiferous plywood.