Aircraft Grade Mahogany Plywood
Lightweight plywood for aircraft interior panels with Swietenia mahogany face ply over okoume core, all plies ≤6mm per FAA specifications. Transparent epoxy finish preserves wood markings. HTS 4412.34.32.55 due to mahogany face ply despite specialized end use.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If plies exceed 6mm or contain non-wood materials
Thicker or mixed-material construction excludes from 'solely wood sheets ≤6mm' plywood definition.
If impregnated with phenolic resins exceeding wood content
Resin-impregnated sheets classify as worked mineral materials under Chapter 68.
If pre-fabricated into aircraft shroud panels
Formed/assembled into shaped products becomes 'builders' joinery' under 4418.40.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• CITES paperwork mandatory for Swietenia even for aircraft use—no exemptions apply at import
• Aviation certifications don't affect HTS classification; base on plywood construction specs only
• Confirm core plies remain wood (not composite) to stay in 4412 rather than engineered wood headings
Related Products under HTS 4412.34.32.55
Mahogany Face Veneer Plywood Panel
Plywood panel consisting solely of wood sheets, each ply not exceeding 6mm thick, featuring a face ply of genuine mahogany (Swietenia spp.) with inner plies of mixed tropical hardwoods. Not surface-covered or covered only with transparent material preserving the mahogany grain and texture. Classified under 4412.34.32.55 due to the specified mahogany face ply on nonconiferous plywood.
Khaya Mahogany Plywood Sheet
Standard 4x8 ft plywood sheet with Khaya spp. (African mahogany) as the exposed face ply, backed by poplar core plies all ≤6mm thick. Grain and texture visible through clear UV protective coating. Falls under HTS 4412.34.32.55 for plywood with Khaya mahogany face ply, not surface-covered obscuring the wood.
Swietenia Mahogany Cabinet Grade Plywood
High-quality 3/4-inch cabinet-grade plywood with genuine Swietenia macrophylla mahogany face veneer ply (≤6mm), crossbanded with lauan and eucalyptus core. Clear lacquer finish reveals natural mahogany figuring. HTS 4412.34.32.55 applies specifically to plywood featuring this restricted mahogany species on the face.
Mahogany Face Baltic Birch Plywood
Baltic birch core plywood (Betula spp.) topped with Khaya mahogany face veneer ply, all plies ≤6mm, finished with clear conversion varnish. Used for fine furniture and millwork. Classified 4412.34.32.55 for the mahogany face on otherwise nonconiferous plywood construction.
Furniture Grade Khaya Plywood
12mm furniture plywood with Khaya ivorensis mahogany face and back over 5-layer hardwood core, all ≤6mm plies. Clear pre-catalyzed lacquer finish. 4412.34.32.55 classification for Khaya face ply on nonconiferous plywood.